Yaman 10t Usage Steps 1. Yaman hrf 10t fuselage is mainly divided into working head, display screen, LEVE control button, switch and mode adjustment button.
2. Horizontal control buttons: There are only three buttons on the display screen. Double-click to add a space. Just adjust it according to your own situation.
3. The mode adjustment button and switch are one button. Long press the switch to turn the machine on and off, and short press the adjustment mode.
Step 1: CLENA cleaning mode (3 minutes)
Yaman hrf 10t uses RF positive ions to deeply clean pores. Need to cooperate with the cotton pad yaman hrf 10t guide head, install the magnetic ring, and pour the cleanser. Press the "MODE" key to adjust and select CLENA cleaning mode. At this time, a "drip" will be heard, indicating that the RF is started (that is, the electrode hair is heated when it is turned on). After a few seconds, two "Didi" sounds will officially start CLENA cleaning mode, and the electrode tip will vibrate instead of heating. In this mode, for 3 minutes, "drip" and "drip" keep circulating, which means it will be hot for a while. When operating Yaman hrf 10t, remember that the massage technique is from bottom to top, not downward. With this step, we can see that many dirty things in pores are derived from cosmetic cotton.
Step 2: Moisture Moisturizing Mode (3 minutes)
This step is to use radio frequency heating and ionic force to make the beauty ingredients penetrate deep into the skin, and the absorption effect is enhanced by 100 times. Apply moisturizing emulsion on cotton pad, and use it with YAMAN hrf 10. In the process of use, the use of Yaman hrf 10t will make you feel that the RF works intermittently and has a certain thermal sensation. After this step, you will feel a little tender and full of water.
Step 3: Lift V-face mode on EMS (3 minutes)
The mode of firming face-lifting is to stimulate facial muscles by EMG while heating the skin, promote metabolism and increase the elasticity of facial muscles. Remember that EMS needs to use water or gel as medium, and other media will greatly affect the function of current. When using, you can move left and right one by one or move in circles, but remember to pull it up.
Step 4: Re LED skin rejuvenation and wrinkle removal mode (time 3 minutes)
Re-LED skin rejuvenation and wrinkle removal mode is a newly added function of YAMAN hrf 10t. It also uses RF heating and LED optical skin beautification to promote fine hair regeneration and collagen regeneration. This model is mainly based on cold compress whitening and freckle removal. After applying skin care products such as face cream to your face, start Yaman hrf 10t, it will emit red LED light, and then hold it 5cm away from your skin to illuminate your whole face. Your eyes can also be used, but remember to take pictures with your eyes closed, otherwise your eyes may be injured by light sources. Be sure not to touch your face and skin, and don't get burned.
Step 5: Cooling shrinkage mode (time 3 minutes)
The last step is the function of exercise to cool the skin, tighten pores and nourish the skin continuously. This step is also the favorite step of many sister papers, just like applying ice to your face, but without the stimulation of ice. Metal refrigeration, you can also use this step to apply your face alone after all skin care products are applied, so that your face feels very good.
Yaman hrf 10t is not suitable for people with 1. Do not use during pregnancy, menstruation or lactation.
2. Do not use it when you have a fever and other physical abnormalities.
3. Do not use for heart disease, serious illness, hemophilia, malignant tumor, allergic constitution, dermatitis, etc.
4. Do not use on the following parts: wounds, plastic parts, mouth, eyelids and eyeballs.
Yaman 10t Chinese manual
Experience yaman 10t started using beauty instrument yaman 10t six months ago. The more you use it, the more you can't leave it. My mother urges me to use it for her three times a week. You can imagine how good the effect is [blowing a kiss R] [blowing a kiss R].
10t has five steps and two buttons. One button is a switch, and the other is to adjust the current.
Step 1: cleaning mode
With the use of the market, a lot of dirty things come out every time, as shown in Figure 7.
Step 2: Moisturizing mode
Mushroom water is used, and occasionally it is made by sticking a mask directly. Use it when you have acne, and the acne will disappear soon. The skin is tender after using it in winter.
Step 3: Ems pulls the compact mode.
Used with red kidney, the skin is smooth after pressing. This mode is mainly to enhance eye lines and then fade spots. Press the decree again.
Step 4: RF Led mode
If your eyes are tired, you can close your eyes and take a photo. Don't be too close when the distance is about 5 cm! Then I usually take a photo as disinfection after squeezing the acne, and the acne will be cured soon.
Step 5: Cooling mode
This mode can be used every day ~ cool, super comfortable. To use the method of pressing, press one by one on your face. You can also press and contract more in places with large pores. It's a little cold in winter, hahahaha.
The last picture shows the massage techniques of various functions, please accept it.