It was not so smooth at the beginning of this year, the epidemic spread, and then I stayed at home for a month. At this time, I felt the inconvenience of not having a car, and I didn't know the difficulty of taking a taxi until I went out. It is also a spring rain, and there are pools of water on the road from time to time. Because of the experience, I had the idea of buying a car. Although I am not rich at present, I still strive for greater travel convenience ...? I haven't experienced many choices in buying Arrizo GX, because the appearance is novel and fashionable, because I feel at home and the price is right. I am also a post-90 s generation, and I usually love to do things. Now I bought a car, which belongs to my mobile home, and I want to be nice to it. At the negotiating table, in addition to bargaining, the best film must be posted at the back, and the original 3M film was posted behind me. Membrane mainly plays the role of explosion protection, ultraviolet protection and heat insulation, so it is also important to choose a good membrane.

Look at the appearance first. The side and front are full of freshness and fashion. The body lines are full of streamline, and one line crosses the whole side of the body until the taillights, which improves the integrity of the whole vehicle and makes it more slender.

I like this style and it seems to hit it off with me.

New cars rarely shine, perhaps because I feel young, so I don't like popular colors and styles, and I like unique design.

The car drove to the workshop for inspection, and then drove to the decoration department to prepare the film.

I booked the car in March and picked it up on the 6th.

Engine compartment overview

The chassis of a car

16 inch tires are quite suitable for cars.

The car stopped at the decoration workshop.

Take out the goods, it is the original 3M solar film, which is said to be imported.

Maybe it's because there are many stickers, so there are samples for all four doors, front glass and back glass. So that the film can be directly cut after opening.

For example, the front file, after the film is cut to size, put it in the front file first. ...

The film and the front gear are dipped in some water around and in the middle, because the next step is to bake with a baking gun.

Bake the gun a little, so that the feel can fit the windshield better, because the film has a certain curvature, but you must also pay attention to the temperature when baking the gun. Blow the film from left to right, everywhere, and make sure that the film has been affected by the hair dryer. This process is the shrinking film, which means that it will not be deformed due to the influence of high temperature and low temperature in the future. Ensure that the whole film is heated evenly. This process takes a little longer, about 10 minutes.

At the end of baking, the mask is close to the glass. Go to the mask.

After rolling up the film, I began to post it in the car, because I might forget to take a photo when chatting.

After the film is fixed outside, the next basic process is to spray a lot of soapy water on the glass inside the car. Don't wipe it. Taking advantage of soapy water, the film sticks to the glass from left to right, and this process cannot produce any creases. As long as it sticks to the glass and does not fall off. After all are stuck on the glass, tear off the outer protective film. Spray water and scrape the film flat with a scraper. Stick it tightly on the glass, including every corner, and the position should be completely correct. After no problem, stick a protective film, spray soapy water, and then scrape. This process is to stick the film tightly to the car glass without damaging it. ? Tear off the protective film after it is completely affixed without problems. This time, deal with corners or local details. If you still see any blisters, you need to use a hair dryer. When blowing, scrape it flat with a shovel (plastic), then spray soapy water, scrape and shovel it again, and so on, until the whole film is completely absorbed on the glass, no bubbles can be seen, and the edges are stuck. Such a large glass film fits perfectly. The next step is waiting. Dry naturally for about 2-3 days. You can use it freely.

The interior of Arrizo GX still has a certain sense of luxury, and the dark interior also makes people feel restrained and dignified. Other function keys are also reasonably matched and easy to use.

The air outlet of the air conditioner extends from the co-pilot to the top of the display screen, which makes the dashboard feel stronger. Then the positions of the central armrest and the shift lever are wide enough and large enough.

The seats are all made of real leather, which makes them feel elastic.

The gear position is centered and easy to use.

Connect the switch after pasting the film, and the glass can be lifted and lowered normally in about 2 or 3 days.

The space in the back seat is also very comfortable.

A car is not necessarily good, but it must be suitable. A car with novel appearance, beautiful interior, superior performance and high cost performance is a good choice. Now I choose Ariza GX because it is really good [hee hee].