1, plastic injection mold: mainly used to produce thermoplastic parts. The processing equipment corresponding to plastic injection mold is plastic injection molding machine. The plastic is heated and melted in the heating cylinder at the bottom of the injection molding machine, then pushed by the screw or plunger of the injection molding machine, and enters the mold cavity through the nozzle of the injection molding machine and the gating system of the mold, and the plastic is cooled, hardened and molded, and demoulded to obtain the product. Its structure usually consists of molding part, pouring system, guiding part, pushing mechanism, temperature control system, exhaust system, supporting part and so on. The manufacturing materials are usually plastic die steel modules, and the commonly used materials are mainly carbon structural steel, carbon tool steel, alloy tool steel and high speed steel. Injection molding is usually only suitable for producing thermoplastic products. Injection molding produces a wide range of plastic products, from daily necessities to various complex machinery, electrical appliances, vehicle parts and so on. It is the most widely used processing method in plastic products production. \x0d\2。 Plastic blow mold: it is a mold used to shape hollow products of plastic containers (such as beverage bottles, daily necessities and other packaging containers). According to the process principle, the forms of blow molding mainly include extrusion blow molding, injection blow molding, injection stretch blow molding (commonly known as "injection stretch blow molding"), multi-layer blow molding, sheet blow molding and so on. The equipment corresponding to blow molding of hollow products is usually called plastic blow molding machine, and blow molding is only suitable for producing thermoplastic products. The structure of the blow mold is relatively simple, and the materials used are mostly carbon. \x0d\3。 Plastic suction mold: it is a mold for molding some relatively simple plastic products with plastic plates and sheets as raw materials. The principle is that the plastic plates and sheets fixed on the female die or male die are deformed and softened by heating, and then they are attached to the cavity of the die to obtain the required molded products. Mainly used in the production of some daily necessities, food and toy packaging products. Because of the low pressure during molding, the plastic suction mold is mostly made of cast aluminum or non-metallic materials, and its structure is relatively simple. \x0d\4。 Plastic wire drawing die: mainly used for producing plastic wire. Its principle is that the plastic melted by the extruder passes through the small hole on the die, and then it is cooled, stretched and rolled to form the final wire drawing product. Die materials are mostly cold-working die steel or nitride steel, and the structure is relatively simple.