The aluminum veneer curtain wall has excellent self-cleaning properties, good corrosion resistance, and a relatively long service life. Therefore, some wall protection is required at this time. In order to make the aluminum veneer curtain wall It is indispensable to show the beauty, safety and protection of aluminum veneer curtain wall of the building for a long time.

Aluminum veneer processing process:

1. Design and draw the parts drawing of its sheet metal parts, also called three views. Its function is to use drawings to process its sheet metal parts. Express the structure of the part.

2. Draw an expansion diagram. That is, unfold a part with a complex structure into a flat piece.

3. Cut the material. The ways to cut the material are: There are many ways, mainly the following methods:

1) Cutting with shearing machine. The shearing machine is used to cut out the length and width of the expanded drawing. If there are punching holes or corner cutting, then use the punching machine. Combined with die punching and corner cutting. (The thickness of aluminum veneer that can be processed by our company's shearing machine is 0.5-6mm, and the thickness of steel plate is 0.5-3mm. The length is within 4 meters, and it takes 3 to 4 times to cut the raw material exceeding 1.2m*2.4m. For manual operation, hold the board flat with both hands)

2). Punch cutting is to use a punch to punch out the flat structure of the unfolded parts on the plate in one or more steps. Its advantages are short working hours, high efficiency, and can reduce processing costs. It is often used in mass production. CNC punching machines can punch out some special-shaped hollow effects with the cooperation of molds. The CNC punching machine HP-2500 used by our company can process aluminum plates with a width within 1530mm.

3). CNC engraving machine cutting. When cutting CNC engraving machine, you must first write a CNC machining program. That is to use programming software to write the drawn expansion diagram into a program that can be recognized by the CNC machining machine. Let it follow these programs step by step. On the aluminum plate, the structural shape of the flat piece is punched out. During processing, attention should be paid to how to layout more reasonably and save materials. Our company's CNC engraving machine can process aluminum plates with a range of 2m*3.5m.

3. Punching. This is to use a punch to punch out the corresponding holes on the aluminum plate according to the drawing, so that the corner codes can be installed during assembly. When processing, pay attention to whether the hole spacing and hole margins are correct.

Exterior wall knife-shaped aluminum veneer

Related terms: aluminum veneer, aluminum veneer, aluminum-plastic panel, aluminum veneer processing, aluminum curtain wall, aluminum veneer processing Craftsmanship