1. Can the drawer slide rail be repaired if it is broken?
If it is a rusty card holder, you can drop some lubricating oil on the bearing and rusty position, and it can be reused after lubrication.
If the deformation derails, you need to take down the drawer, adjust the deformation position with a screwdriver, and then put it back in the drawer after recovery.
If it is damaged or cracked, you need to remove the drawer, use tools to remove the whole slide rail, buy the slide rail of the same model, install and fix it in the original position, and then put the drawer back.
2. What are the drawer slides?
1, roller slide rail
Roller slide rail is a common kind, which may be known from the first time we contacted the slide rail. It belongs to the first generation silent slide rail, which mainly consists of a pulley and two guide rails. Its carrying capacity is insufficient. If you put too many heavy objects in the drawer, it is easy to be damaged, unable to buffer or rebound, and inconvenient, so it is gradually eliminated in the market.
2. Steel ball slide rail
The steel ball slide rail consists of two or three slide rails, which are generally made of metal. It is installed on the side of the drawer, which is a good substitute for the roller slide rail, and saves space without worrying about the pressure. It is a very popular product.
3. Damping slide rail
Damping slide rail has good buffering capacity. In the process of use, the drawer can be closed slowly by itself with a little force, and there will be no big collision sound. Moreover, the hydraulic design of the last section can slow down the closing speed of the drawer, greatly reduce the impact force and avoid damage. Damping slide rails are widely used in cabinets and bathroom cabinets.