Hot runner: hot runner, hot manifold hot nozzle cold runner: hot main runner/cold runner
Direct nozzle DC: direct gate circular runner: circular (full runner/half runner
Computer analysis of runner: die flow analysis runner balance: runner balance
Hot nozzle: hot runner plate: hot manifold
Heating pipe: barrel heater probe: thermocouple
Plug: connector plug socket: connector socket
Sealing/sealing material: sealing
Two: mold parts: mold components
Three-plate mold: three-plate mold, two-plate mold: two-plate mold
Edge nail/guide edge: guide pin/guide pin edge division/guide sleeve: bushing/guide sleeve
Intermediate bracket: shoulder guide bushing Intermediate bracket L: guide pin
Ejector fixing plate: ejector fixing plate: supporting plate
Screw: threaded pipe nail: locating pin
Mold opening groove: ply bar scot internal mold tube position: core/cavity interlock.
Thimble: ejector pin spool: ejector pin sleeve
Shuttle needle: ejector pin push plate: stripper plate
Shrinkage: move the core and return to the core puller.
Fastener (nylon hook): nylon latch inclined top: elevator
Mold blank (frame): upper internal mold of mold base: cavity insert
Lower internal model: core insertion line position (slider): slider
Insert: insert holder/tilted chicken: wedge-shaped
Wear plate/oil plate: wedge-shaped wear plate delamination: plate
Support head: support column nozzle: sprue sleeve
Baffle: baffle locating ring: locating ring.
Lock: lock chicken: separate lock set
Push rod: Push rod bolt: hexagon socket head screw
Top plate: eracuretun movable arm: lever arm
Diverter cone: spure sperader nozzle branch: bushing
Garbage nail: stop pin gasket: buffle
Slingshot sticker: spring rod Slingshot: die spring
Intermediate bracket: ejector guide bushing Intermediate bracket: ejector guide pin
Pin: locating pin
Wave bullet bow: catch the ball
Third, the formation mode of English and Chinese bad words.
Color difference bank logo particle bite
Blackening hole coating hole (casting defect) blackening scar coating scar
Blistering, flowering and frosting
Loo full-hole blush whitening
Body wrinkles, side wall wrinkles and meat running-in riser
Sticking point of bubble burn marks of bubble film
Burr, burr, bending and warping
There are central ripples on the surface of the bubble central buckle.
Check the tiny cracks, check the cracks.
Fracture repair of dents on casting surface defects
Collapse collapse stain
Corrosion crack
Cracking crack
Deformed trimming fragment
Edge crack, edge crack, fading, fading
Filler talk fills the cracks in the material points.
Flange wrinkle flange wrinkle flaw scratch
Flow mark flow mark wear burr
Polishing smooth luster
Grease stains, grinding defects, wear marks
Cracking smoke
Hard shell indentation
Incompatible partial mode of internal pores
Spotted necking
Surface defects of orange peel cut by nicking
Overflow stripping
Pitting in the pit
Plate mark template imprint pockmark pockmark
resin streak
Resin products resin falls off.
Sagging saponification
Scar scar waste
Scratch/scratch.
Drawing surface scratches joint cracks.
The extrusion short shot filling of impact line die is insufficient.
Shrinkage, indentation, dent, skin inclusion, skin folding and straightening
Stripes and stripes mark the surface, check the surface cracks, rough surface, wrinkles and undulations of orange peel epidermis.
Sweating, sweating, twisting, warping and ripple marks
Ribbon collapse weld line weld line whitening wrinkle
English-Chinese Comparison of Various Moulds in classification and terminology
Landing plunger mould with shoulder
Polishing die extrusion die landing male die with shoulder full press die
Button die inlaid with round die shoe die
Center gate mold Center gate mold Loose parts mold Movable parts mold
Chilling die for cold hardening movable die
Closed cold extrusion die, open die and blind die.
Composite mold manifold mold manifold mold
Recoil head modular combined die for recoil head
Double-layered mold Double-layered mold Multi-cavity mold
Electroforming die Electroforming die Multi-gate die Compound gate die
Bulging die Bulging die Bending die Double-fold cold bending die
Extrusion die, palletizing die, laminating die
Family mould reverse sleeve product mould gypsum mould gypsum mould
Punching die leakage punching die porous die ventilation die
Compound cavity plate composite plate die male die full press die
Fan tail die
Fishbone die Fishbone die special-shaped die special-shaped die
Overflow die Overflow die Continuous die Continuous die
Gypsum mould portable mould
Hot runner mold Hot runner prototype mold prototype test mold
Ingot die Ingot die Punching die Blanking die
Slitting die cutting pile (embossing) embossing and wave forming.
Combined die of concave die chamfering die
Runner-free injection mold Runner-free cold material mold combined mold matching mold
Semi-male die and semi-full pressing die for sectional die combination die
Single-cavity mould for forming mould sleeve of forming machine
Integral forging die Integral forging die Split forging die Split forging die
Parting double parallel dies, sprue-free dies, and sprue-free residual dies.
Extrusion die Extrusion die Stretching die Stretching die
Sweeping die, flat scraping die, oscillating die and vibrating die.
Die-cutting die-cutting die-cutting die-cutting die-cutting.
Unit die unit die universal die
Loosen the mold back button mold yoke mold.
General English for Machinery: Stamping Die-Parts
Punch punch insert (insert)
Deburring punch burr punch groove punch line punch
Punching punch circular punch
Punch bending block folding knife special for special-shaped punch
Roller buffer plate stop
Positioning block for positioning bearing seat Positioning block support block
Air cushion ejector pin of air cushion plate
Dressing punch Dressing rib punch = stinger rib punch
Ribbon Punch Punch Punch Punch Drum Stretch Punch Curl and Flatten Punch
Guide plate positioning plate slider slider
Sliding pin block slider fixed block movable plate movable plate
Lower slide plate, lower slide block, upper clamp block and upper press block
Upper and middle plate spring box spring box
Spring box ejector pin spring box ejector pin spring box top piece spring box top piece
Bushing block bushing cover plate
Guide pad guide block
Mechanical English: Stamping Die Template
Pad on the top plate tray (top plate) top block
The upper die seat of the punch group is provided with a punch pad and a backing plate.
Upper clamp plate stripper pad stripper back plate of punch holder
Stripping male die on upper stripper plate (male die)
Characteristic die female die (female die)
Upper formwork, lower formwork and lower formwork.
The die pad is under the die seat and the lower splint is under the die pad.
Lower foot pad of bottom block of lower die base of module
Punching holes (stripper plate) inside and outside the stripper plate of the tray under the bottom plate (bottom plate)
External stripper External stripper Internal stripper Internal stripper
Lower stripper
Stamping die-English-Chinese comparison of stamping names
Common die, simple die, punching die, punching die
Forming die continuous die
Combined die Combined die Shear die cutting edge die
Piercing of riveting die
Forming drawing hole
Bending and trimming
Relief convex dome convex circle
Half-shear half-shear stamp stamping mark
Deburring or coin burr stamping riveting stamping riveting
Side drawing side stamping flat drum Stretching roll circle flattening
Groove line pressing blanking
Stamp letter stamping (material) shear cutting
The left side of the scale line is indented on the front, and the right side of the scale line is indented on the back.
Extended drawing development program drawing engineering drawing
Mold structure dwg mold structure diagram material material
Material thickness plate thickness coefficient
Up, up, down, down
Press specification punch specification die height range applicable die height
Mold height closed mold height
Clearance clearance punch weight upper die weight