Gaskets are added between the annular contact surfaces to raise the crushing cone, so as to ensure that the gear clearance is within the specified range and meet the technical requirements.
(2) Grinding and scraping the spherical bearing to make the contact between the spherical bearing and the spindle drive body conform to the specifications.
(3) When the oil quantity is insufficient, check whether the oil level and oil quantity of the fuel tank are normal and whether the ministries leak oil. Lubricating oil must be changed regularly.
When cleaning, the water tank, pipes and filters should be thoroughly cleaned.
(4) Wear caused by radial direction and bearing surface of spherical tile seat can be treated by surfacing welding. A self-made group can be added after the radial and bearing surface wear surfacing of the lathe bed.
The tools are processed on site to restore the lathe bed to the design requirements.
(5) When the lubricating oil pressure is too high, the safety valve should be adjusted or replaced, and the pressure should be adjusted within the specified range.
For more information, please visit www.haoposuiji.com.