How to install household led lights? I believe everyone is familiar with household led lights. Led lights can light up our house. It is not easy to install led lights. Next, I will tell you how to install household led lights.

How to install household led lamp 1 1, unpack and take out the lamp tube (ceiling lamps usually have their own light source).

2. Put the base well and draw the position of the hole.

3. Drill holes in the ceiling according to the installation hole position of the ceiling lamp.

4, in the place where the eye is punched, the colloid is inserted to fix the screw. Put the base on it, turn it at an angle and tighten the screws.

5. Wiring (carefully connect the wires to avoid loosening in the future).

6. Replace the lamp tube, and then cover the lampshade.

Is the LED light safe?

Objectively speaking, this kind of lamp is safe. It is not only safe, but also has many advantages. For example, it is energy-saving, and the brightness per watt of LED lamp is 5 times that of conventional lamp. It has a long service life. The service life of general LED lamps can reach 10000 hours or more. If it is lit at 5 o'clock every day, it is 2000 days, which means it can be used for more than 5 years. The light source of LED lamp belongs to solid-state light source, which is generally not easy to break down.

How to maintain LED lights?

1. When using led lights, try not to switch them on and off frequently. Although led lamps are durable, frequent switching of led lamps will still affect the service life of internal components of led lamps, thus affecting the service life of led lamps. Special attention should also be paid to the environment in which LED lamps are used. Generally speaking, led lamps are not suitable for working in humid environment (except those with moisture-proof performance), and the electronic components inside are easy to get wet, resulting in led lamps being damaged or short-circuited.

2. When cleaning the led lamp, remember not to change its structure or replace parts at will. After cleaning, install it as it is, and never miss or misplace the parts. Don't rinse with water when cleaning, wipe with a dry rag, and don't wipe with a wet rag immediately after turning on the light, which is prone to danger.

What models of LED lights are there?

1, according to the packing method: patch needle piranha, etc. ;

2, according to the shape: round head, flat head, flat head concave, straw hat head, helmet head, bullet, etc.

3. According to power: low power, medium power, high power, etc.

4. According to dimensions: 2mm, 3mm, 5mm, 8mm, 10mm, 12mm, 0805, 1206, 3528, 5050, etc.

5. Color: white light, blue light, warm white light, green light, red light, pink light, yellow light, purple light, etc.

How to install household led lights? How to install 2 led strip?

Self-adhesive 3M double-sided adhesive tape is attached to the back of each led soft light bar. When installing, you can directly tear off the adhesive on the surface of 3M double-sided adhesive tape, and then fix the LED light bar in the installation position and stick it firmly by hand. As for some places that need to turn or the length of led light bars is inconsistent. The led light bar is a circuit structure consisting of three LEDs in series and parallel. Every three LEDs can be cut off, when it is long, it can be cut off, and when it is short, it can be soldered on.

When led light bars are used outdoors, they will be eroded by rain and ultraviolet rays. If it is fixed with 3M glue, the long-term use of 3M glue will reduce, resulting in the led strip falling off. Therefore, outdoor LED soft light strips are often installed with slots. Where the connection needs to be cut, the method is the same as indoor installation, except that waterproof glue is needed to consolidate the waterproof effect of the connection point.

The general voltage of led light bar is 12V DC, so switching power supply is needed. The power supply is calculated according to the power and length of the led light bar. You can also buy a high-power switching power supply as the main power supply, and all the input power supplies of LED soft light strips are connected in parallel (it can be extended if the wire size is not enough), and the power supply is unified by the main switching power supply. The advantage of this is centralized control, but the inconvenience is that the lighting effect and switch control of a single led light bar cannot be realized, and the specific way can be measured by yourself.

LED track and RGB bar need to use controllers to achieve color change effect, but the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 to 15 meters, and the control distance of a remote controller is 15 to 20 meters, which can be controlled as far as 30 meters. If the connection distance of led light bar is long and the controller can't control such a long light bar, then a power amplifier is needed for tapping.

What are the characteristics of led light bars?

Led light bars are pure in luminous color, gorgeous in color, high in brightness, energy-saving and environmentally friendly, long in service life, safe and reliable, and gradually emerge in the decoration industry. When led light strips are used in indoor decoration, the requirements for waterproof and ultraviolet protection are not high, and the installation is relatively simple.

How to install household led lights? 3 led light bar installation.

1. Indoor installation: When LED strip is used for indoor decoration, the installation is very simple because it is not subject to wind and rain. Take LED strip produced by Hong Guang Electronics as an example. 3M double-sided adhesive tape is attached to the back of each LED strip. When installing, you can directly tear off the adhesive on the surface of 3M double-sided adhesive tape, and then fix the light bar where it needs to be installed and flatten it by hand. What if some places need corners or are long? Very simply, LED strip is a circuit structure consisting of three LEDs connected in series and in parallel, and every three LEDs can be cut and used separately.

2. Outdoor installation: Outdoor installation will suffer from wind and rain. If it is fixed with 3M glue, the viscosity of 3M will decrease after a long time, resulting in LED strip falling off. Therefore, the outdoor installation often adopts the method of card slot, and the method of cutting connection is the same as that of indoor installation, except that waterproof glue is needed to consolidate the waterproof effect of the connection point.

3. Power connection mode: The general voltage in LED strip is 12V DC, so switching power supply is needed. The power supply depends on the power and connection length of the LED light bar. If you don't want each LED strip to be controlled by one power supply, you can buy a high-power switching power supply as the main power supply, and then connect all the LED strip input power supplies in parallel (it can be lengthened if the wire diameter is not enough), and the power supply is unified by the main switching power supply. The advantage of this is centralized control, but the inconvenience is that the lighting effect and switch control of a single LED strip cannot be realized, and the specific way can be measured by yourself.

4. Connection mode of controllers: LED racing lights and RGB full color lights need to use controllers to achieve the change effect, but the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 to 15 meters, and the control distance of a remote controller is 15 to 20 meters, which can be controlled as far as 30 meters. If the connection distance of LED light bar is long and the controller can't control such a long light bar, then a power amplifier is needed for tapping.