Introduction of plate specifications
1. What is the plate specification? In fact, different types of plates have different specifications. For example, MDF is made of wood fibers or other plant fibers, and then some urea-formaldehyde resin or other suitable adhesives are added. General plate size is 1220mm*2440mm*2mm~30mm. If there are special requirements, additional customization is needed.
2. The specification of large core board is also called joinery board. It is made of two middle veneers. The price is cheap, the bending performance is poor, but the transverse bending strength is better. High, the general paper size is 2440mm* 1220mm, and the thickness is 3, 5 and 9cm.
3. Particleboard specifications are divided into plain particleboard. There are two types of extruded particleboard. It is a sheet made of sawdust as the main raw material, and then glue and additives are added. Its general paper size is 1220mm*2440mm, and its thickness is between 25 and 45mm.
4. By using different colors or textures of paper, the specifications of melamine board are added to the melamine resin adhesive. When it is dried to a certain extent, it is placed on the surface of MDF, particleboard or hardboard. Finally, heat the decorative panel. The board size is generally 2440mm* 1220mm.
5. The specifications of gypsum board have the effect of heat insulation and sound absorption. The specifications of this board are divided into 2400 *1200 * 9.5 ~12,3000 *1200 * 9.5 ~12,2440 *1220 * 9. (Unit: mm)
6. Plywood specifications, made of three or more layers 1 mm thick veneer or sheet adhesive, are most commonly used for home decoration. There are six specifications, namely 3mm, 5mm, 9mm, 12mm, 15mm, 18mm.
7. The specification of the decorative board has the single-sided decorative effect made of plywood, and then it is made by gluing process. Its thickness is 3 mm.
8. The specifications of the fire-proof board are made of calcareous materials and siliceous materials, then mixed with a certain proportion of lightweight molding materials, mixed fiber materials, chemical additives and adhesives, and then used for autoclaving. The specifications of the plate are: the thickness is generally 0.8mm, 1mm,1.2 mm. ..
Buying skills of plate
65438+
2. Distinguish between veneer and natural veneer. Wood veneer The texture of wood veneer is generally straight and the texture pattern is regular. Natural wood veneer is a natural wood grain, and the texture pattern naturally changes greatly and irregularly.
3. The decorative board should have a good aesthetic appearance, the material should be fine and uniform, the color should be clear, and the wood grain should be beautiful. The texture of the board and solid wood composite floor should be arranged according to certain rules, the wood color is similar, and the joint is almost parallel to the edge of the board.
4. The rubber layer of the plate should have a stable structure, and there should be no glue opening phenomenon, and there should be no protruding delamination phenomenon inside the substrate between the plate and the substrate.
5. Try to choose environmentally friendly plates instead of some irritating decorative plates. If the smell of the board is too strong, it means that the formaldehyde emission is too high, and the more serious the pollution, the greater the harm to the human body.
The above is the introduction of the relevant contents about the plate specifications we brought. Thank you for reading our article.