Manufacturer: Morita, Japan
Product description:
-Root canal length measurement mode (root ZX mode)
Accurate measurement can be carried out;
It can display the position of root canal needle in real time and accurately detect the position of root tip;
No calibration is required;
Whether the root canal is dry or filled with electrolyte solution, the root canal length can be automatically and accurately measured;
Beeps that vary according to location;
According to the change of buzzer sound, the position of root canal needle can be judged.
-Root canal enlargement function
Root canal dilator with root canal length measurement function;
Within the set length range, the root canal can be enlarged accurately and effectively;
8-stage speed regulation
1. The speed can be adjusted to 50, 100, 250, 300, 400, 500, 600 and 800 rpm.
Lightweight of mobile phone: humanized root canal is adopted, which expands the grip of mobile phone, which is very good.
-5 automatic control systems
Accurate treatment can be performed above the range of apical surgery.
Automatic apical inversion
The root canal needle will automatically stop rotating when it reaches the end of the apical operation range arbitrarily set in advance, and then automatically start.
Reverse. In addition, only stop or the time from stop to reversal can be set;
2. Reduce the damage of root canal needle.
Automatic torque reversal
When the set torque limit is exceeded, the rotation will automatically stop and then reverse. You can set 1 1 according to the situation.
Torque limit value of stage. (Don't cut when reversing);
3. There is no need to operate the on/off switch.
Automatic start/stop
The root canal needle rotates automatically when it is inserted into the root canal and stops automatically after it is pulled out.
4. Fine enlargement and treatment can be carried out within the scope of apical surgery.
Automatic apical deceleration.
When the working needle approaches the set top operating range, the motor speed will automatically decrease;
5. Prevent the working needle from being overloaded.
Automatic torque deceleration
When the load on the working needle is too large, the working needle will automatically slow down.
Technical parameters:
1. Root canal length measuring instrument (root ZX mode)
Size: w105× d105× h115mm.
Consumption rate: 0.2 Volta
Power supply voltage: DC4.5V V v.
Weight: about 400g
2. Root canal enlargement module
Power consumption: 20VA
Charging function: fast charging function
Size: w105× d127× h115mm.
Weight: about 430g
3. Main hose (used for root canal expansion)
4. Root canal expansion mobile phone
Diameter: max18mm
Length:165mm
Weight: about 70g (including bending head)