Faced with this situation, it can be perfectly repaired and renovated through professional welding technology; The wheel hub edge is damaged, and the automobile wheel hub is accidentally hit by a hard object, which will cause the wheel hub edge to break. Usually, in this case, the tires of the car must be replaced, and the wheels can be perfectly repaired and refurbished by welding and shaping; Hub edge clearance. When the hard hub is violently hit by stones or other hard objects, the edge of the automobile hub will be knocked out of a gap. According to the shape of the gap, the wheel hub repair expert will make a perfect repair through surfacing, airtight detection and surface treatment. There are six specific steps to repair the scratches on the automobile hub:
Check the scars. If the inner side of the hub is not damaged, it can be repaired simply. Wipe around the scar with paint thinner to remove dirt. It is difficult to remove the dirt with the deepest scratch, so you can clean it thoroughly with a toothpick. In order to prevent irrelevant parts from being smeared by mistake, it is best to carefully stick adhesive tape around the scar; Tidy up the nib and paint it with decorative paint. The paint will shrink slightly after drying, so it's better to apply it a little. After painting, it takes about a week to dry completely. After drying, dip the waterproof paper with soapy water to make the surface smooth; After wiping with waterproof paper, polishing with mixed solution, and then waxing. If you encounter deep scars, it is important to observe whether the metal surface is exposed. If you can't see the metal surface, you won't rust, so you can concentrate on painting decorative paint. Put it bit by bit with a pen tip, and then wait until the paint is completely dry. In order to avoid this phenomenon, the car should be diligent in cleaning the rim when it is used for the first time. The car you drive every day should wash the rim at least once a week, first with clean water, then with detergent and sponge, and then with plenty of clean water. Several common methods of repairing and renovating damaged wheel hub.
It is quite common that the hub edge is scratched and damaged. It's easy to scratch the edge by rotating against the curb while driving. In this case, only a special repair stick is needed to repair it. The rim of the wheel hub is cracked and damaged. When a car is accidentally hit by a hard object while driving, the hub will break. Usually, the hub can be repaired with a special aluminum welding machine for the hub, and then the hub can be refurbished and reshaped after welding. Hub edge notch.
When the wheel hub is hit by a stone or hard object, it will make a gap on the edge of the wheel hub, so it needs to be filled with special wheel hub filler ash, because it has super adhesion and is not easy to peel off after repair. The hub is twisted and deformed. When the automobile hub is hit or collided, it is easy to cause the rim of the automobile hub to bend and deform, which is a serious damage. As long as the internal structure of the hub is not damaged, it can be corrected by plastic repair and special straightening machine (if the deformation is too severe, it is recommended to replace the hub directly).