In fact, this umbrella is not broken, but there is only a temporary situation, so all you have to do is take it back with the head and handle, that is, collect it like a small umbrella before opening it.

Automatic umbrella capable of automatically opening and closing the umbrella: a compression spring sleeve 10 is arranged outside the umbrella opening compression spring 2, and the compression spring sleeve 10 is arranged in the skeleton connecting sleeve 9, and the skeleton connecting sleeve is provided with radial clips, both ends of which are wedge-shaped and can slide left and right, and a spring bolt 1 1 is arranged outside the skeleton connecting sleeve. There are sliding multi-thread spiral inner and outer sleeves 12 and 13 above the umbrella handle 5, and there are matching multi-thread between them. When the umbrella is closed, the sliding outer sleeve and the inner sleeve can extend out to compress the umbrella opening compression spring 2, and the clip on the skeleton joint 9 can position the umbrella opening compression spring.

The spring closing device can be an umbrella retracting compression spring 1 5 between the canopy connector1and the canopy connector 8. When the umbrella opening pressure spring is pressed, the umbrella opening pressure spring can be opened and compressed, the spring pin 1 1 is pulled down, so that the clip slides out, the umbrella closing pressure spring closes the umbrella, and the spiral sleeve 65438+ is rotated and slid.