In our daily lives, many people have various small advertisements posted on their security doors. These ads are particularly annoying, difficult to remove, and affect the appearance. Many people use many methods to get rid of it.

How to remove the small advertisement on the security door?

You can use a hair dryer to get it off. First turn on the hot air and aim it at the place where the advertisement is posted, because the hot air will reduce the stickiness of the advertising paper, and then you can easily tear it off. If there are glue marks on the door after cleaning, you can use a wet towel to remove them. You can also use medical alcohol to remove it directly, put a little alcohol on the advertising area, and then wipe it a few times and it will be gone.

Clean the small advertisement glue on the door

First use a rag to soak the small advertisement in hot water, wipe off the paper part, and then use a dry rag to dip it in the waste oil from the range hood Slowly wipe off the rubber bottom (waste oil can dissolve the rubber bottom), then use dish soap to wipe off the oil on the upper surface of the door, then use a clean rag and water to wipe the dish soap on the door, and spray a layer of dish soap after it dries. Room door small advertising protective agent (available online). Small advertisements can no longer be posted.

How to remove the small advertisement on the security door

1. Dip a rag into a little warm water and press it on the small advertisement. After about 5 minutes, the advertising paper is completely soaked in water, and wipe the surface of the advertising paper with a rag. A layer of glue will be left behind, which can be slowly wiped off with an eraser.

2. Use a hair dryer to heat the small advertisement. When it reaches a certain temperature, the glue will lose a certain amount of stickiness, and if you tear it off by hand, the advertising paper can be easily removed.

3. Apply sesame oil on the small advertisement to make the advertising paper moist enough. Wait about 5 to 10 minutes, the balm will soak the entire advertising paper, and the advertising paper can be completely torn off without leaving any residue.

Tips for repairing anti-theft security doors

1. Try to push and pull gently when opening and closing the door, because long-term violent impact will loosen the parts of the anti-theft door, thereby reducing its service life.

2. Although anti-theft doors are not very expensive, they also require good maintenance during use, so it is best to wipe the facade with a soft cloth frequently to keep it clean, which can also prevent corrosive substances. of erosion.

3. The metal hardware of security doors is prone to rust, causing friction when opening and closing the door. You can put a little lubricant on the door hardware or call a professional repairman directly.

4. Do not inject debris or oil into the keyhole of the anti-theft door lock to avoid jamming. If the lock is not flexible, you can use pencil powder to add a little lubrication to restore the normal use of the lock.