There are many kinds of stainless steel pipes, but the main uses are as follows:
A, the classification of stainless steel pipe
1, classified by production mode:
(1) Seamless tubes-cold drawn tubes, extruded tubes and cold rolled tubes.
(2) Welded pipe:
(a) According to the process classification-gas shielded welded pipe, arc welded pipe and resistance welded pipe (high frequency and low frequency).
(b) According to the weld-straight welded pipe and spiral welded pipe.
2. According to the section shape, it is classified as (1) circular steel pipe; ② Rectangular tube.
3. Classification by wall thickness-thin-walled steel pipe and thick-walled steel pipe.
4. Classification by use: (1) Civil pipelines are divided into round pipes, rectangular pipes and flower pipes, which are generally used for decoration, architecture and structure;
(2) Industrial pipes: steel pipes for industrial water distribution pipes, steel pipes for main water distribution pipes (drinking water pipes), mechanical structure/fluid conveying pipes, boiler heat exchange pipes, food hygiene pipes, etc. It is generally used in various fields of industry, such as petrochemical industry, paper making, nuclear energy, food, beverage, medicine and other industries with high requirements for fluid media.
Second, seamless steel pipe
Stainless steel seamless pipe is a kind of long steel with hollow section and no seam around it.
1. Manufacturing technology and flow of seamless steel pipe:
Smelting > ingot > steel rolling > sawing > peeling > perforation > annealing > pickling > ash removal > cold drawing > cutting head > pickling > warehousing.
2. The characteristics of seamless steel pipe:
It is not difficult to see from the above technological process: firstly, the thicker the wall thickness of the product, the more economical and practical it will be, and the thinner the wall thickness, the higher its processing cost will be; Secondly, the technology of this product determines its limitations. Generally, the precision of seamless steel pipe is low: the wall thickness is uneven, the brightness of the inner and outer surfaces of the pipe is low, the cut-to-length cost is high, and the pits and black spots on the inner and outer surfaces are difficult to remove; Third, its detection and shaping must be done off-line. Therefore, it shows its advantages in high pressure, high strength and mechanical structure materials.