How to install the air conditioner? I believe that most friends who have seen others install air conditioners know that the first step in installing air conditioners is to measure the distance and punch holes in the wall. Installing air conditioning is not as simple as we saw, because installing air conditioning requires a certain technical content. Most people who buy air conditioners will not install air conditioners themselves, and most will ask some masters to install them. The following small series will share the steps and methods of air conditioning installation for everyone. I wonder how the air conditioner is installed. Friends can learn about it.

The installation steps of the air conditioner are as follows

1, air conditioning installation is to make a slightly higher wall hole first. Then install it. Remember to plug the hole in the wall with putty after installation. When installing the air conditioner, attention should be paid to prevent freon leakage, and leak detection should be carried out after installation. At the same time, to prevent indoor and outdoor water leakage, it is necessary to ensure that the condensed water can be discharged to the outdoor smoothly, otherwise it is easy to cause indoor and outdoor water leakage.

2. The outdoor unit of air conditioner can't be installed casually. It needs to be installed in a suitable location, which is generally easy to repair and maintain.

3, pay attention to the use of silver covered electrode welding when welding, because copper covered electrode welding effect is not good, easy to leak and all kinds of dangerous events, and easy to conduct electricity. When extending the refrigeration copper tube, it should be wrapped tightly with insulation sleeve and bandaged. There is no need for too much wind, because too much will lead to abnormal cold air in and out.

4. The drain pipe of the air conditioner must be installed vertically, and it can be tilted outwards appropriately, which is beneficial to running water and smoother drainage. The air conditioner should be installed in a place where it is not easy to be exposed to direct sunlight, because the air conditioner is always an electrical appliance, which is prone to heat when running, and exposure to sunlight will shorten its service life.

5. Install the air conditioner indoors near the drain pipe, fix the air conditioner on the wall with tools, and then connect the drain pipe. After completing the above steps, you can try to turn on the power supply to see if the air conditioner is running normally and whether there will be water leakage and water backflow in the drainage area. If this phenomenon is found, turn off the power supply in time and see the reason.

The above are the methods and steps of air conditioning installation. Do you know how to install air conditioner now? Pay attention to the horizontal line when installing air conditioner. If the two ends of the horizontal line of the air conditioner are different, it will easily lead to the internal burning of the air conditioner and lead to the imbalance of the air conditioner. When installing the air conditioner, pay attention to the horizontal line and the installation of the external machine. If the external unit is installed in the wrong position, it is easy to damage the air conditioner and make it unusable.