1. Connect the DC power plug to the back of S9.
2. Connect the power cord to the power supply equipment.
3. Connect the other end of the power cord to the power socket.
4. Connect the air pipe firmly to the air outlet.
5. Connect the assembled mask system to the trachea.
Introduction of Resmai control panel
Risimai * * * has four buttons and an LCD panel. It is worth noting that:
1. Press the start stop button for a long time to turn the machine on and off, and press it for a short time to stop the machine.
2. There are two operation modes of the fine-tuning button, the first is pressing and the second is rotating.
3.I button (also called information menu) to view related information.
4. Set the button to change the settings.
Start resmai
1.？ Make sure the power is turned on.
2.？ If necessary, adjust the delay boost time.
3.？ Wear a mask according to the user's instructions.
4.？ To start the treatment, press the start stop button (or put on a breathing mask to open your breath).
5.？ Lie down and put the trachea in place to ensure that the trachea moves freely when you turn over during sleep.
6.？ To stop the treatment, press the start stop button (or take off the breathing mask).
Delayed booster and mask installation
Delaying the booster time is to feel more comfortable during the treatment, which is a period of time from low pressure to treatment pressure.
1. Press the control panel, turn the button, and then turn the button until "Delayed Boost Ramp".
2.？ Press the rotate button, and the options turn orange.
3.？ Turn the knob to adjust the acceleration time you want.
4.？ Press the rotary button to confirm the selection.
You can also use the mask try-on function to help yourself wear the mask correctly. This function provides treatment pressure for three minutes at the beginning, during which you can check the wearing of the mask and reduce air leakage.
1. Wear a mask according to the mask wearing instructions.
2. Press and hold the rotate button on the home page for three seconds.
3. Adjust the mask and posture.