It is called bipolar electrocoagulation forceps and consists of Shuang Ye forceps body and electrode clamp. The ends of the Shuang Ye pliers are respectively connected with electrode clips, and the electrode clips are provided with high-frequency input plugs. The outer surface of the Shuang Ye pliers is provided with an insulation layer, and any leaf in the Shuang Ye pliers is provided with a water channel along the direction of the pliers. The water outlet at the front end of the waterway is located at the conductive working tip at the end of the valve clamp body, and the water inlet at the rear end is led out from the wall of the valve clamp body and hermetically connected to the water delivery conduit. Because a water channel composed of water pipes is embedded in the forceps body, and the water outlet of the water pipe is close to the head of the bipolar electrocoagulation forceps, sterile physiological saline will slowly and continuously flow to the head of the bipolar electrocoagulation forceps through the water pipe during the operation of electrocoagulation hemostasis, thus avoiding the formation of scars.