First, the owner sends the broken steel pieces into the furnace. Under high temperature calcination, it only takes a few minutes for the blank to become plastic. Then the master puts the blank on the mold, and the punch cuts each blank into the shape of two pliers, and the end of each pliers has a cutting head. This is a factory specializing in making nail clippers. Then the machine drills a small hole at the end of the pliers to fix the rivet, and they will level the area with a milling cutter so that the two pliers can be better connected.
Second, next, when the master fills the ceramics, he pours the pliers into the vibrator. A few hours of vibration will grind off the rough parts on the pliers, and then he will use a magnetized conveyor belt to suck Gang Qian out of the vibration machine. Next, the master manually grinds the whole surface of the pliers until the surface is completely smooth. Then brush lubricating oil on the end cloth of pliers to prevent rust and wear here. Next, the master will overlap two pliers on the end cloth, and then the machine will let rivets pass through the holes to fix the two pliers together. At this time, the rivet will protrude slightly, and the master will manually smooth the rivet on the grinder.
Thirdly, in the next step, the master fixed the nail clipper on the machine and then polished his blade with a file. Too little polishing will affect the gap between blades, and too many files will probably completely destroy the blades. The master will use paper to test whether the blade of the nail clipper is polished in place. Next, they drilled holes in the handle and connected springs to make the nail clippers easier to open and close. This factory can produce 400 nail clippers every day. Before the nail is made, the quality of the next step should be tested. The factory uses the current method for testing, and the nail clippers after testing can be packaged, shipped and sold. Here, the production steps of nail clippers have been completed.