() Planning location map (area map) (scale limit)

Indicate the relationship between the planned city location and the surrounding main functional areas, and plan the traffic facilities, routes and accessibility of the surrounding important roads.

(2) Planning Status Map (1: 2000)

Indicate the present situation of land use, buildings and cloth, strengthen houses and realize the present situation of municipal public facilities.

1. The present situation of land use includes indicating the scope, ownership, nature and other types of land use in the planning area.

2. The status quo of ports shows the number, density, distribution and structure of border ports in each administrative region in the planning area.

3. The current situation of buildings includes the texture, nature, quality and height of all kinds of buildings in the planning area.

4. The status quo of public service facilities and municipal facilities shows the type, location, registration and scale of public service facilities (including administrative office, business finance, science education, sports health, culture and entertainment, etc.). Road traffic network, water supply, power supply and other municipal engineering facilities and pipeline layout in the planning area and surrounding areas.

(3) Land use planning map

Planning all kinds of use boundaries, planning the nature of use, road network layout and location of public facilities; It is necessary to indicate the nature of various uses and the number of boundary blocks on the current map. The road planning layout structure indicates the location, registration, scale and main planning control indicators of municipal facilities and public facilities.

(four) road traffic and vertical planning map

Determine the location, straightness, cross section, coordinates and elevation of each branch intersection, and the planned elevation of each outdoor apron of the parking lot traffic facilities;

1. Road traffic planning map

The status map shows the connection between the road system in the planning area and the road system outside the planning area, determines the red line width, road alignment and direction of roads at all levels in the area, and indicates the channelization design of important intersections with the coordinate elevation, slope, kerb radius and curve radius of road control points; The control range of rail transit and the railway direction; Location, scale and scope of use of road traffic facilities (including community parking lots, public transport and rail transit stations, etc.). )

2. Elevation view

The state diagram shows which drainage blocks of roads at all levels in the planning area, indicating the planning control elevation, turning point elevation, slope and slope of roads at all levels from each block to the intersection.

(5) Plan of public service facilities (1: 2000)

Indicate the location, category, grade, scale, distribution, service radius and corresponding construction requirements of public service facilities.

(6) Engineering Pipeline Plan (1: 2000)

All kinds of engineering pipe network layout, pipe diameter, coordinate elevation of control points, specific water supply and drainage, electric power and telecommunications, thermal gas, pipeline synthesis and other necessary addresses.

1. Water supply plan

Indicate the capacity, plane position, water supply elevation and water supply pipeline diameter of water supply facilities such as water supply source waterworks and pressurized pumping stations in the planning area.

2. Drainage map

Indicate the direction, diameter and control elevation of rainwater pipes and canals on the scale plane of rainwater pumping stations in the planning area; Indicate the plane position of sewage treatment plant and sewage pumping station, the direction of sewage pipeline, pipe diameter and the position of control elevation nozzle.

3. Power supply plan

Indicate the plane position, capacity scale, plane position and control height of high-voltage line corridor of power supply stations, substations and substations at all levels in the planning area.

4. Telecommunication plan

Indicate the plane position and capacity of telecommunication sources and telecommunication bureaus in the planning area, and determine the direction and width of microwave channels and the height limit requirements of the starting point.

5. Natural gas planning map

Indicate the plane position and capacity scale of the gas storage and distribution station in the planning area, and the grade, direction and diameter of the gas pipeline.

6. Heating plan

Indicate the scale, capacity, grade, trend and pipe diameter of the heating pipe network in the planning area.

(seven) environmental sanitation and environmental protection planning.

Indicate the location, service radius, use and protective isolation facilities of various health facilities.

(8) Schematic diagram of spatial form (the scale is plane-like scale1:1000 ~1:2000)

Express urban design ideas and concepts, and coordinate the relationship between architecture, environment and public space. The three-dimensional features of planning area space include bird's-eye view of the overall space and key sections of the planning area, elevation views of main nodes, perspective views of space efficiency and schematic diagrams expressing urban design ideas.

(9) Concept map of urban design (spatial landscape planning, characteristics and protection planning) (scale 1: 2000)

To express the concept of urban design, control the architecture, environment and spatial form, check and adjust the block planning index, and implement the layout of important public facilities, it is necessary to indicate the layout boundary of landscape county, landscape node, landscape interface, space, visual corridor and other spatial elements and the concept of building height area; Indicate the boundary of the landscape location of cultural relics protection units, historical blocks and characteristic landscape lots that need to be protected.

(x) Block numbering plan (scale 1: 5000)

The block number indicating the specific boundary of the block map is used as the index of the block map.

(10) block control plan (ratio1:1000 ~1:2000)

It means that the red line of the planned road ends with the control indicators such as the boundary, block area, use nature, building density, building height and floor area ratio, and the block number is marked. Tu Tu is as general as Tu Tu, so it is necessary to draw two kinds of block maps according to the current situation, so as to facilitate the comparison between the planning content and the current situation.

1. Block location;

2. Fast boundary and block number;

3 planning nature, compatibility and main control indicators;

4. The location and scope of public facilities and green space, the location and scope of protection of cultural relics protection units and historical blocks;

5. Road red line, building back line, building discount rate, road intersection control coordinates, elevation, semi-turn, bus stop, parking lot, no-go section, street bridge, etc.

6. Class B municipal passage and space control need high-voltage line corridors, microwave passages, and clearance for railway flight.

7. Health and safety protection distance of facilities with special environmental impact;

8. Key points and precautions of urban design

In Tu Tu, the regulatory detailed planning reflects the surface content required for drawing drawings: control charts, control tables and control guidelines include the wind rose chart, compass, scale, legend and drawing number, while the project description chart includes some basic elements control lines, coordinate labels and their logo block numbers.