Soft rope can choose brown rope or plastic rope; According to the position, thickness and bending form of the growing points of tree branches, the flat points and knotting points are selected; Tie one end of the soft rope to the upper end of the branch that needs to be bent, wipe the branch in the direction that needs to be bent, and slowly bend it to the required radian, and then tie the other end of the soft rope to the place where the trunk or thick branch is not easy to slip, so as to complete the first bending;
When winding thick branches, you can do it several times, tighten the soft rope 1 time every 10 day, increase the bending degree, and finally reach the required bending degree; Loosen the drawstring in time to avoid the drawstring falling into the meat.
2. Tie the metal wire.
The metal wire can be iron wire, copper wire or aluminum wire, and the diameter of the metal wire should be1/3 of the thickness of the flat branch base; Winding is carried out in the order from big branches to thin branches, from bottom to top, and from inside to outside; The starting point of fixed flat steel can be selected at the root or branch intersection;
In order to prevent the branches from breaking, the metal wire must be tied to the branches, so that the metal wire is spirally wound on the branches at an angle of 45 degrees, and the density and direction of the wound metal wire should be mastered, and then the branches should be pulled to bend with force at the bending position; In order to avoid embedding wires in trees, we should observe trees regularly and remove wires in time.