Automotive sheet metal will use the following tools: 1. The leveling flat hammer is used for leveling the outer plate; 2. Fine repair the small protrusions on the outer plate with a pointed hammer; 3. The contraction hammer can effectively control the metal elongation in the leveling process; 4. Rubber hammer, which can be used for molding metal outer plates and structural parts; 5. The wooden hammer can effectively inhibit the metal extension when the outer plate is leveled; 6. Pad iron, which provides support for the steel plate when knocking; 7. Draw a needle to mark the metal plate; 8. Slap, which is used to repair the tendon line; 9. Ruler, which can be used to judge whether the surface of steel plate is flat or not; 10. Rough crowbar can roughly shape the depression from the inside to the outside of the plate; 1 1. Fine crowbar, repair the vehicle with scratch-free paint; 12. Flexible file, which can check the protruding part on the plate; 13. Pneumatic belt sander, used to polish the old paint layer at the corners; 14. Angle grinder, which can quickly polish the old paint layer on the plate; 15. Small paint rust remover used to remove rust on steel plates; 16. The pneumatic glue gun is used to glue and seal the repaired accident car.