In the process of modeling, there are three filling methods, namely ordinary filling, plastic filling and water filling:
1. Ordinary soil filling method: recommended lime soil filling in Tamiya and quick-drying soil filling by county officials.
2. Plastic filling method: mainly used for large parts, filling gaps, adding details and other special treatments.
3. Water-filling method: In the model processing and design, water-filling can be sprayed or filled with glass, and the choice must be based on the specific conditions of the model. Although convenient, the effect is difficult to guarantee.
Extended data:
Matters needing attention in model soil filling:
If there are cracks or gaps between the important load-bearing parts in the model and the main body, only fill can be used instead of 502) and details (such as soil marks, etc.) can be made. ), but also can be used for modeling, pit filling, etc. Can't spray. There are foundation soil, AB soil, light hard soil and liquid soil. Their basic uses are similar, but the shaping function of AB fill (of course, this function is limited, and not all shapes can be made of AB fill) is not available in other fill.
Because glue contains a lot of organic solvents, it should be used in a well-ventilated environment to avoid inhaling too much solvent vapor, which is harmful to health (such solvents evaporate quickly).
Baidu encyclopedia-mending soil