The floor of the dance studio cannot rotate in circles. It may be that the floor is deformed and uneven, resulting in increased friction, so it cannot rotate.

If the ground is not smooth and clean enough during the installation process of the dance floor glue, it may cause the existence of some bubbles, which will seriously affect the normal use of the floor glue. We all know that the ground is uneven. , then a certain space will be reserved during the installation process, and there will be air. If it is affected by some pressure during the application process, it will cause some wear or deformation, so this aspect is very important. of.

For uneven ground installation, the local pressure capacity of the floor glue will increase during the application process, which will cause some warping consequences. Therefore, in order to extend the service life of the floor glue , it is necessary to inspect all aspects of the installation of floor glue.

Precautions for laying floor glue in the dance studio

1. Check the ground condition, clean the surface thoroughly, and ensure that the ground is smooth and clean. If the ground is not cleaned and leveled, it is easy for the floor glue to rise and become uneven after laying.

2. If cutting is required during the paving process, the joints should be cut neatly and connected well to increase the stability of the floor glue and prevent it from moving.

3. Select the thickness of the dance floor glue according to the ground conditions. 4mm and 5mm dance floor glue are suitable for cement floors and tile floors; 3mm, 3.5mm and 4mm floor glue are suitable for floor floors. Different thicknesses of installed dance flooring have different shock absorption and buffering capabilities. 4. When installing dance floor glue, measure the indoor area in advance and then cut the floor glue to reduce waste and construction costs.

Reference for the above content: Baidu Encyclopedia-Dancing Floor Glue