1. In order to make the straight pole of Podocarpus pine show a curved, strong and strong effect, it can be cultivated by upright poles and displayed in the form of inclined poles and curved poles. , improve the overall effect of bonsai from the shape. During the process, materials such as metal wires and screws can be used to assist the implementation. At the same time, the straight rod can be carved during the bending process, and the rod can be twisted to shape the trunk. The compression of the trunk can be achieved by combining a variety of methods. Bending and tilting, let it develop along the desired effect.

2. The height of the podocarpus shape should generally be controlled at 1.5-3.5 meters, original: wWW.PJcN.orG, and the principle of "adapting the shape of the tree to the material conditions" should be adhered to during the shaping process. Moreover, the modeling process must be scientific and reasonable, avoid violating the basic laws of growth of Podocarpus, and proceed within the range of its ability to withstand the degree of bending. It must not be implemented blindly, otherwise it may cause greater damage to the tree, etc. Unexpected circumstances occur.

3. In addition, for the styling design of straight poles of Podocarpus, the timing must be grasped. It is not possible to design straight poles anytime and anywhere. Generally, after 4 years of potted cultivation, when the lower part of the podocarpus gradually becomes lignified, we can first use reasonable means to twist the lower pole into a bottom bend to allow it to continue to grow and finalize its shape. If it is planted on the ground, the time for this operation should generally be carried out earlier.

4. Normally, for those with lower skills, the straight rod can be bent when its diameter is less than 1 cm. If you are a master of bonsai art, you can often bend it successfully even if the diameter of the straight pole reaches 7-8 centimeters due to your skillful skills. However, in comparison, the smaller the diameter of the pole, the easier it is to bend it. There are also various ways to bend the pole, and some can even perform surgery on the pole without injuring your muscles or bones.