(2) Rough shaping of portrait machine, the operation method is the same as manual ironing.
(3) Mechanical pressing, with the steam pressure controlled at 0. 15-0.2 MPa. The sequence is as follows: left inner lapel → right inner lapel (pay attention to buttons and zipper) → left sleeve → right sleeve (subject to the back elbow line, the front sleeve should be round and not hot) → left rear shoulder → right rear shoulder → left rear piece → right rear piece → left front piece shoulder chest, left front piece lower piece → right front piece shoulder chest → right front piece lower piece. Put a shoulder pad on the sleeve shoulder, hold it up with your left hand, press it hard on the heating plate of the machine, and iron the two sleeve shoulders respectively. Finally, use an iron to modify the lining like manual ironing.