1, take six 6.5mm wax wires, each 2 meters long, and tie a temporary knot at 60cm after alignment.
2. Take one of the threads as the axis, weave a row of oblique knots for winding other threads.
3. Pull the rightmost line to the left to make an axis and make a row of oblique knots for winding other lines.
4. Repeat the above steps and make 6 rows of oblique knots.
5. The last shaft is pulled back to the right to make a shaft, and the remaining lines are wound into a row of oblique knots.
6. Make 6 rows of diagonal knots in the same way.
7. Continue to pull the shaft to the left and tie a diagonal knot.
8. Make 6 rows of diagonal knots in the same way.
9. Repeat the above steps to make 8 pieces, and then continue to make a little gap every two pieces, and make 6 pieces with gaps.
10, after completion, the back two wires will be set aside, and the middle four wires will be made into four strands with a length of about 50cm.
1 1, four strands are fixed. First, clamp the two on the left. The two on the right take the left line as the axis and the right line as the winding, and tie a left oblique knot.
12, axis winding is unchanged, and make a right oblique knot.
13, and the two on the left also tie a left oblique knot.
14, and make a right oblique knot.
15, two axes intersect.
16, repeat the above steps and make another prism.
17, the other end of the line is also made of six oblique knots, and then made into a four-strand braid about 8cm long. Do it in the same way, cut off all the extra threads and burn them.
18. Take the long line just cut, make a circle and fix both ends.
19. Tie a flat knot on the circle with another long thread, then cut off and burn the two threads.
20. After the long four-strand braid is folded in half, wrap the smaller thread around the four-strand braid and tighten it, and then cut off the excess thread.
2 1, two tails penetrate into four braided loops, and an adjustable clavicle chain can be formed as long as the flat loop is pushed tightly.
22. Put your favorite pendant on the four-strand braid, and the final product will come out.