Angle grinder is a hand-held equipment for grinding and cutting, and it is an ideal tool for cutting stainless steel plates. It needs a side grinder to match the blade. After the angle grinder and cutting wheel are set, mark and mark the incision, aim the cutting wheel at the area to be cut, and slowly put it on the stainless steel plate.

2. Cutting saw

Cutting saw is a small tool, which is suitable for cutting thin stainless steel plate parts. There is also a popular pneumatic cutting saw, which is very important for the cutting process. A durable and high-speed cutting wheel is needed.

When using this equipment, in order to prevent people from being hurt by cutting debris, first mark the position to be cut, and then slowly press the blade onto the material. Cut the steel slowly, don't give up halfway. After cutting, grind the edge with a grinding wheel to prevent the incision from cutting hands.

3. Circular saw

If you want to cut large stainless steel plates, a circular saw is a good tool. This equipment can cut a thick stainless steel panel, fix the stainless steel panel with a special metal cutting blade, mark the cutting position, and slowly cut into the material.

4. Band saw

Band saws are used to cut stainless steel plates, mainly for pipes. The blade penetrates the stainless steel plate to cut the horizontal plane. This special blade is made of tungsten carbide, and the cutting speed can be set very low, so that the incision will be smoother.

5. Pipe cutting machine

The pipe cutter is mainly used for cutting stainless steel plate pipes. When the cutter rotates, the cutting wheel gradually cuts the pipe.

6, plasma cutting machine

Plasma cutting machine is an ideal choice for cutting large stainless steel plates. Concentrated energy beam is used to cut thick materials, and the cutting end is placed about 7CM away from the surface of stainless steel plate. After opening, the steel plate will burn immediately and cut along the wire. In order to obtain good cutting effect, it is necessary to cut in a straight line.

Safety measures should be taken when cutting stainless steel plates and cutting tools should be used. Any fall or trip may lead to a serious accident.