1. Set or call related parameters through the touch screen of the wax injection machine control box.

2. When the mold is placed on the mold feeding assembly line, the scanner will automatically scan the bar code on the mold. If it is an electronic identification system, it will be automatically identified by induction.

3. The mold pushing cylinder on the upper mold assembly line pushes the mold to the initial alignment of the manipulator and clamps the wax mold in the initial alignment.

4. Press the cylinder handle on the wax injection fixture to hold the mold, push the cylinder to push the mold to the wax injection position, vacuumize and start wax injection.

5. After wax injection, the pusher cylinder automatically returns, the press cylinder returns, the fixture is loosened, and the mold is sent to the cooling tank by the mold discharge line.