Current location - Plastic Surgery and Aesthetics Network - Clothing company - How to draw the ceiling with CAD, and what are the sizes? detailed
How to draw the ceiling with CAD, and what are the sizes? detailed
First, draw a rectangle with the rectangle tool, and leave a space on the left here to show the curtain.

Second, the picture below is a copy of the curtains in the gallery.

Third, offset another rectangle, which can be defined as 400 mm here, where cyan represents gypsum board.

Fourth, draw a light band again, and the red table shows no light band.

Fifth, put the headlights here again. It would be even more luxurious if you saw this headlight when you entered the door.

Sixth, copy the bronze lamps in the gallery.

Seven, draw the picture below, there are three diamonds, and the square is drawn here with the rotating tool. Just copy a few copper lamps and you'll be done.

Eight, as shown below, the ceiling of the living room is completed.

Extended data:

How to draw the ceiling in CAD?

First, the blank space shown below is used to set the top layout of the restaurant.

Second, the dotted line here comes from the beam and cannot be moved.

Three, with a multi-segment line for the following figure, blue represents gypsum board, red represents light belt.

Fourth, the lights here are copied from the cad library. There are many CAD galleries on the Internet, and I also have several previous articles. This lamp is very luxurious and looks more upscale.

Fifth, draw the following picture on the arc, which is also a very simple operation.

Sixth, copy the bronze lamp again here.

Seven, mark the height again, where +24 10 is the height from the floor. The cad ceiling diagram has been completed, as shown below.

References:

How to draw Baidu -CAD ceiling?