The drum of the washing machine does not rotate. If the motor is working and there is noise, it should be a capacitor problem. Just replace the capacitor. In another case, the drive belt between the drum and the engine is damaged, resulting in idling of the motor. In this case, the problem can be solved by removing the drive belt and replacing it.

The specific solutions are as follows

1. If the motor buzzes when washing with the automatic washing machine, but it doesn't rotate, it may be the problem of enabling the power capacitor. If the motor doesn't make sound, there may be something wrong with the lid linkage switch of the dehydration barrel.

2. Step 1, check whether the drive belt is loose, check the ratchet mechanism and clutch to see whether the brake is tight and whether the mechanism parts on the drum cover are broken.

3. Sometimes the motor with clutch is very hot. It may be that the starting capacitor is damaged or disconnected, which makes the motor unable to start. If it is an automatic washing machine without clutch, check whether the motor is stuck. First, don't turn on the high-speed motor to test whether it is stuck. If it is not stuck, there may be something wrong with the starting capacitor.

4. Does the dehydration cylinder not rotate normally under the following conditions?

(1) Motor damage (no response when plugged in)

(2) The brake line is broken (the motor cannot be started after being plugged in)

(3) The timing switch is damaged (after turning the knob, the timing switch does not buzz)

(4) The sealing ring is damaged (it is difficult to adjust the clothes with damaged sealing ring until it can't rotate, and then you can hear the drum banging)

(5) Short circuit of distribution line (usually visible)