Current location - Plastic Surgery and Aesthetics Network - Clothing company - Why do shoes shine?
Why do shoes shine?
Glowing shoes, soles with LED strip, storage battery and USB interface charger, which can be charged for 8- 10 hour.

An electronic switch that makes the circuit start to work with a luminous shoe lamp. Others call it a sliding switch or a rocking switch and so on.

In fact, these names are not completely correct. The names in the industry are generally divided into two categories, spring switch and ball switch. Comprise a spherical switch. Because of its age, it has been recognized as a mistake. Strictly speaking, the name of the ball switch is wrong, while other names such as slide switch and swing switch should refer to the ball switch. For convenience, the spring switch and ball switch are generally called vibration switches in the industry. Spherical switches are mainly used in electronic toys, small household appliances, sports equipment and various anti-theft devices.

A luminous shoe lamp comprises a sleeve, two conductive blocks, a sphere and a plug cover arranged in the sleeve, and is characterized in that the sleeve is made of an insulating material, has opposite upper and lower end faces, and has a concave hole extending from the upper end face to the lower end face, wherein the concave hole has an upward open end and a closed end close to the lower end face, and the concave hole has a wide diameter part close to the open end and a narrow diameter less than the wide diameter part far from the open end. The sphere is made of conductive material and is rollably arranged in the concave hole of the sleeve; The conductive blocks are made of conductive materials and arranged in the through holes and concave holes of the sleeve at intervals. The bottoms of the two opposite ends of the conductive blocks are respectively provided with terminals extending to the bottom of the lower end face of the sleeve and semi-circular block-shaped accommodating seats extending from the top end of the terminals to the middle. The accommodating seats have a circular concave top surface, the periphery of which is located at the abutment of the shoulder and the narrow diameter part of the concave hole, and the circular concave top surface extends from the periphery of the concave hole to the center. The plug cover made of insulating material is fixedly installed on the upper end face of the sleeve and closes the open end of the concave hole.