This size is small, so you must measure your waistline correctly when choosing pants. The size types marked on trousers are 165/68A, etc. The front 165 stands for height, 68 stands for waist circumference, and 68cm is about two feet waist circumference. Normal casual pants will use this size.
According to the standard size, the waist circumference is 27 inches, 1 inch = =2.545 cm, and the size of 27 is about 27*2.545=68 CM. Two feet equals 66.66 centimeters. The size of trousers is distinguished according to different data of waist circumference, hip circumference and leg circumference, and 27 is the overall size of trousers. Generally speaking, the size of trousers is a representation of comprehensive data, including leg circumference, hip circumference and trousers waist circumference. Size 27 and size 26 are common pants sizes, that is, the waist size of pants. I suggest you try on your trousers when you buy them.
Introduction to dimensional measurement:
The basic principle of all clothing measurement is the same, but the measurement method will be slightly different for different customers. Therefore, when measuring the size, we should pay attention to whether the customer's size specification table has the prompt of measurement method, understand the customer's measurement method before production, and confirm the measurement of samples and prenatal samples.
Before measuring, it is best to make a size table suitable for recording the measurement results. Good records can help you analyze the measured dimensions. If the size does not match, it can be used as the basis for asking the production department to correct it.
The clothes to be measured must be flat. It is hard to imagine that a wrinkled dress can be measured correctly by the inspector. The buttons and zippers of the clothes to be tested must be fastened. The clothes to be measured shall not be stretched or curled before or during measurement, especially the clothes to be measured shall not be stretched or curled because they cannot reach the size.