Three factors determine the decoration quality of clothing stores.
Wall decoration
The wall is the place where the clothing store specially recommends this season's clothes, and it is also the first place for customers to watch after entering the door. Therefore, the decoration of the wall is very important.
Wall decoration is mainly selected from two aspects: decorative materials and colors. In terms of materials, wallpaper, latex paint, paving boards and tiles can all be selected by themselves. The wall design of a clothing store should be coordinated with the color content of the displayed goods and adapt to the environment and image of the clothing store. Generally, display cabinets can be erected on the wall, display tables can be placed, and some simple equipment can be installed. You can put some clothes on it, and it can also be used as a display platform or an ornament for goods.
Container shelf design
Container shelf is one of the main facilities for displaying, displaying and selling goods.
The container design requires practicality, flexibility and firmness, which is not only convenient for shop assistants to operate, but also convenient for consumers to visit, and can also meet the different requirements of all kinds of clothes. Mainly the choice of materials and shapes of container shelves. General container shelves are square, displaying goods and placing them all over the world. But the special-shaped container shelf will change its dull and monotonous image, add lively line changes, and make the clothing store show the meaning of curve. Special-shaped cabinets have triangle, trapezoid, semicircle and polygon. Ceiling decoration
The ceiling can create the aesthetic feeling in the clothing store, and can also cooperate with the space design and lighting to form a beautiful shopping environment. Appropriate ceiling decoration will cover the functions of beams and columns, pipes, heat insulation and sound insulation, so it is very important for its decoration. When designing the ceiling, we should consider the material, color and height of the ceiling, especially the color of the ceiling.
The ceiling should have a modern sense, express personal charm, pay attention to the overall collocation, and let the elegance of color be fully exposed. Four Points for Attention in Clothing Store Decoration
First, the ground should not be completely paved with marble.
The weight of marble is dozens of times that of floor tiles and wooden floors. If all marble is laid, the floor may be overwhelmed.
Especially above the second floor, because the house decoration has not been appraised by the house safety appraisal station, the weight of the ground decoration materials shall not exceed 40 kg/m2. Second, don't make holes in the load-bearing wall at will.
It is not allowed to change the load-bearing wall or dismantle the wall connecting the balcony and doors and windows, expand the original size of doors and windows or build new doors and windows. This will cause local cracks in the building, seriously affect the seismic capacity, thus shortening the service life of the building.
Third, don't pursue luxury excessively.
The wall is covered with plates, and the ceiling is inlaid with two or three layers of three-dimensional suspended ceilings. This kind of decoration looks luxurious, but it is not desirable. Because the walls are covered with plates, it takes up a lot of space, which will reduce the area of the whole space and the cost is high, which is not conducive to fire prevention. The low ceiling will make the whole room feel depressed.
Fourth, avoid using aluminum wires for electric wires.
Because of the poor conductivity of aluminum wire, the wire is easy to heat up, the joint is loose and even cause fire.
So the wire should be copper wire. In addition, during construction, attention should be paid to the fact that you can't directly dig trenches and bury wires on the wall, and you should adopt regular casing installation to avoid leakage and fire. Four major tests after the decoration of clothing stores
Water pipes and electric pipes should be based on the nearest distance and the least interface, and the pipes should be straight and tidy, with as little bending and overlapping as possible; All indoor copper pipes are used,
Rubber-coated copper pipes for hot water, PVC pipes for launching, and waterproof tapes for interfaces; Install the basin and the sitting surface horizontally and horizontally; Kitchen and bathroom should have floor drains; Test water after installation. Whether there are pits and scratches on the floor and polished floor, and whether the corners need to be polished with a grinder; Use wax oil for the floor at least three times; The floor should be covered with crural lines for edge sealing; Plywood should be used for the wooden floor, oil-proof paper or plastic film should be used at the bottom, and space should be left around. The surface of the board shall be smooth and level, free from gouges, chips and burrs, with clear patterns, uniform paint color, tight gaps, staggered joints, clean surface and straight and square joints. In terms of bonding, it is necessary to bond firmly, the surface is clean, there is no glue overflow, and the floor plates are arranged reasonably and beautifully. The joint is tight, the surface is smooth, the joint arrangement is reasonable and beautiful, the mouth is straight and the cutting angle is accurate. The wooden floor should be evenly coated with hard wax, soft wax and wax, smooth and bright, with the same color.
Ceramic tile and brick surface should be set flat, the angle should be accurate and the interface should be aligned; The bathroom floor should have an appropriate slope, and no water can accumulate; After cleaning the white cement at the interface of ceramic tile, brush the white cement with rattan wire, and do not leave cement stains on the surface of ceramic tile.
Wallpapers and walls should be polished for more than 5 times after being painted with waterproof oil, and polished with even sandpaper every time. If there is a gap, it must be repaired immediately. The concave position of the convex wall is invisible to the naked eye, and it is based on the fact that there is no big bump by hand. The wallpaper should be attached to your mouth accurately, without foaming, cut with a sharp knife according to the regulations, and don't tear the edge of the paper.
Paint, the surface color is correct, uniform, smooth, no tearing, too thick, undercoat, foaming and other phenomena; The paint boundary is straight and tidy, and there is no oil stain crossing the boundary; When plastering the wall, there is no concave and convex, and the corner is flat. The interface between board and board, board and wall should be plastered and plastered; When the distance of latex paint is 1 m, there should be no scanning trace; The color of wooden nails should be accurate and smooth.
The content about the decoration of clothing stores is introduced here today. I hope to give you some help!
Smooth and bright, with the same color. Ceramic tile and brick surface should be set flat, the angle should be accurate and the interface should be aligned; The bathroom floor should have an appropriate slope, and no water can accumulate; After cleaning the white cement at the interface of ceramic tile, brush the white cement with rattan wire, and do not leave cement stains on the surface of ceramic tile.
Wallpapers and walls should be polished for more than 5 times after being painted with waterproof oil, and polished with even sandpaper every time. If there is a gap, it must be repaired immediately. The concave position of the convex wall is invisible to the naked eye, and it is based on the fact that there is no big bump by hand. The wallpaper should be attached to your mouth accurately, without foaming, cut with a sharp knife according to the regulations, and don't tear the edge of the paper.
Paint, the surface color is correct, uniform, smooth, no tearing, too thick, undercoat, foaming and other phenomena; The paint boundary is straight and tidy, and there is no oil stain crossing the boundary; When plastering the wall, there is no concave and convex, and the corner is flat. The interface between board and board, board and wall should be plastered and plastered; When the distance of latex paint is 1 m, there should be no scanning trace; The color of wooden nails should be accurate and smooth.
The content about the decoration of clothing stores is introduced here today. I hope to give you some help!