Current location - Plastic Surgery and Aesthetics Network - Clothing company - 9.4 Explosion Rescue of Hynix Factory in Wuxi, Jiangsu Province
9.4 Explosion Rescue of Hynix Factory in Wuxi, Jiangsu Province
After the fire broke out, the main leaders of the municipal party Committee gave instructions to do a good job in fighting, to ensure the safety of personnel and to minimize disaster losses. The municipal government and the party and government leaders of the new district rushed to the scene to organize fire fighting and rescue work. The municipal environmental protection department quickly organized the detection of the surrounding environment and air quality of the enterprise.

After the incident, the company immediately launched an emergency plan to evacuate all personnel. More than 200 officers and men of Wuxi Firefighters rushed to the scene to put out the fire. As of 18: 00, all the open flames have been extinguished. One of the people evacuated from the workshop was slightly injured, and more than ten people have gone to the hospital for respiratory examination, all of which are fine.

On September 4th, 20 13, a fire broke out at SK Hynix semiconductor company in wuxi new district at 5: 38. Upon receiving the alarm, Wuxi 1 19 Command Center immediately dispatched more than 200 officers and men from 9 active squadrons, including Wudulu Squadron and Secret Service Squadron 2, and 2 full-time fire brigades and 47 fire engines from Dongting and Meicun * * 1 1 Squadron. After the fire broke out, the main leaders of Wuxi Municipal Party Committee and Municipal Government, such as acting mayor of Quan Wang, vice mayor of Zhao Zhixin and vice mayor of Cao Jiazhong, rushed to the scene at the first time.

15: 50, Wudu Road Squadron arrived at the scene, and fire officers and soldiers arrived at the scene to evacuate more than 500 employees of the company 1500 and put out the fire. At the same time, 15: 08, 5100, 15: 59 reinforcements arrived, and 16: 40 controlled the fire. After more than two hours of fighting, the fire was successfully put out on 18: 08 and 13.

After preliminary investigation, the fire broke out in M0 1 production building of SK Hynix Company, and it gradually spread from the ventilation duct on the second floor to the third, fourth and fifth floors. The fire area is about 600 square meters, mainly burning gas cabinets, combustible gas pipes and other substances, and the fire did not cause casualties.