Soak the soft cloth with enough 95% alcohol, and then gently wipe the adhesive, the adhesive will become soft and easy to fall off. At the same time, alcohol generally does not damage the surface of plastic parts or car paint.

2. Gasoline will dissolve.

Wipe the adhesive with a soft cloth dipped in a little gasoline. Note: Because gasoline can "dissolve" a certain plastic or paint, it must be used carefully: you can wipe it in an unimportant place first and observe it, and use it as if nothing has happened, but you must be careful not to use too much gasoline and the wiping time should be as short as possible.

3. Polishing and removal.

You can buy 1200 water sandpaper to wipe off traces, and then buy a can of transparent varnish, dilute it with banana oil, and brush it once to restore brightness. Don't brush nail polish. Although the glue mark can be removed, it is a pity that there will be white stains on the door.

4. demoulding after heating.

Soften the glue with a hair dryer, put a plastic putty knife on the edge of the 3M adhesive tape, and then peel it off the car surface.