Current location - Plastic Surgery and Aesthetics Network - Clothing company - How to repair the depilation machine when it runs to both sides?
How to repair the depilation machine when it runs to both sides?
The method is as follows:

1. Make sure that the pin plate screw of the depilating machine has been tightened to ensure the stability of the machine.

2. Adjust the speed of the brush to the slowest gear. This helps to control the running speed of the brush and reduce the offset.

3. Adjust the distance between the brush and the cloth so that it does not exceed 0.5cm. If the distance is too large, the cloth will be inhaled, and if the distance is too small, the brush will not work normally.

3. Check the abrasion of the brush. The brush is badly worn and needs to be replaced with a new one to ensure its normal work.

5. Check whether the brush is installed correctly. Incorrect installation of brushes leads to unstable operation or deviation. The brush needs to be reinstalled to ensure its correct position.

6. The depilation device is adjustable, and the angle and position of the depilation device can be adjusted to make it depilate more accurately.

7. Check whether the motor and driving part of the machine work normally. It is found that there is a problem with the motor or the driving part, and it is necessary to repair or replace the motor.