1, the front skirt is different, and the CF line is fixed;

2. Don't horizontally close the front waist opening to the first point of force, cut the raw edge of the waist opening and cut it at the first point of force. (Be careful not to exceed the open line of WL line) Move the waist allowance down slightly. The first wave is 7cm double on HL line, and the cloth sample is placed obliquely at the side seam to get the swing of the hem;

3. Make waves at the marked second wave force point in the same way;

4. The third wave is smaller than the first two waves, and the HL line is 4 cm double;

5. The standard side seam is perpendicular to the ground;

6. Similarly, the two waves of the side seam are the same size and parallel.

7. After assembling and molding with pins, observe the composition balance of each surface with three-dimensional pilot.