Today, I especially recommend the popular AI course:1.ai-illustrator cc 2018 intensive series of tutorials: 96,600 users have learned it! The course is divided into three parts: "tool characteristics+use skills+classroom cases" and gradually deepened ~2. AI- whale illustration drawing: ice beauty teacher explains wonderful courses, and uses case whale illustration drawing to provide you with AI illustration drawing skills ~3. AI- illustration Bicycle Drawing: This course explains AI drawing in detail, with detailed steps and clear knowledge points, which will help you master AI illustration skills faster ~4. Ai-
1. How to create an avatar 1
After opening AdobeIllustrator and creating a new document with a width of 850x850 pixels, we started to draw the head portrait, which is the same for all women. Use the ellipse tool (L) to draw an ellipse. In the picture below, you can see the fill color you need. Change this shape: enter effect > deformation > fish. Enter the options you see below and press OK.
Second step
For the eyes, first create a brown ellipse (using the ellipse tool (L)). Turn slightly to the left. Next, create a white ellipse in front of the brown (use Control-C and Control-F). Move diagonally downward to the right.
End your eyes with a small dark brown circle. To make a uniform circle, use the ellipse tool (L) while holding down the Shift key. Finally, group all eyes (right click >; Group).
Third step
Put your eyes on the left side of your head. Hold down the Alt key with the reflection tool (O) and click on the forehead. In the new dialog window, select vertical, with an angle of 90 degrees, and then press Copy. You should have two eyes by now.
Fourth step
Draw a small circle on the face where the nose is. Create another circle, keep it selected, pick up the eyedropper tool (I) and click on the face. Now, your new circle will get the same color as your face. Overlap the two circles so that you can see the shape of the new moon. This is the nose.
Use the same technique to create ears. First draw an ellipse and place it on the left side of the head (the same color as the head filling). You can turn it a little to the left if you like. Then draw a smaller and darker ellipse on it. Overlay it with a new ellipse (the same color as the head filling) so that you can see the crescent shape.
Take the reflection tool (O), hold down the Alt key and click in the middle of the head. In the new dialog window, select vertical, with an angle of 90 degrees, and then press Copy. You should have two ears by now.
Step five
Let's do our eyebrows. Use the ellipse tool (L) to create a thin and horizontal black ellipse. Then use the direct selection tool (a) to select by dragging the top and bottom anchor points of the ellipse and sliding up. This will be the eyebrows.
Step 6
Put your eyebrows on the left. Rotate at will, but you want to-just don't make her angry! Create another eyebrow using the same technique as creating eyes and ears. Now you have two eyebrows.
Step 7
To draw a mouth, draw a new horizontal ellipse. Select this new ellipse and transform them by clicking the left and right anchor points with the Transform Anchor Point Tool (Shift-C).
Create a new white ellipse (Control-C, Control-F) in front. Shrink it, but make sure the white ellipse stays inside the brown ellipse. It is important to combine the whole mouth.
After that, influence > twist > arc, and enter the options you see below. The smiling mouth is ready!
Put your mouth where it belongs.
Step 8
Using the Rectangle Tool (M), add a rectangle under the head to create the neck. It should be the same color as the face. In the selected state, go to Effect >；; Distortion > highlights. In the new dialog window, enter the options shown in the figure below. Expand the shape (object >；; Expand the appearance).
Step 9
To finish the head, let's add some curly hair. Draw a big circle behind your head. Leave it selected and go to object > path > add anchor. Do this a few times and you will notice how to add anchor points evenly on the circle.
Then go to the effect >; Distortion and deformation >: folding and expansion. In the new dialog window, move the slider to the right to get 6%, and then press OK. You should finally look like curly hair. Don't forget to enlarge this shape (object >；; Expand the appearance).
2. How to create the main step 1
In this step, we will create a woman's body. Use the rounded rectangle tool to create a brown rounded rectangle. In order to modify this shape again, we will use the bulge effect; Twist > highlight) and use the options shown below. Expand the shape (object >；; Extended appearance) is very important.
Next, create a copy (Control-C, Control-F) of this shape in front, and change the color of the copy to yellow. Now, in order to create a neckline, we will cut off the top half of the yellow shape. For this tool, create an ellipse with any fill color you want. Make sure that the ellipse overlaps the top of the rounded rectangle. With the two shapes selected, press the MinusFront button (window >；); Pathfinder).
Second step
Let's add the left sleeve. Create a small rounded rectangle and attach it to the left side of the body. To change the shape of the sleeve, we will delete the two bottom anchor points of the rounded rectangle marked on the image. Just delete the anchor tool (-) and click two anchor points to delete it. You will get a yellow sleeve.
To make the arm, we will start with the vertical ellipse behind the left sleeve. To modify this ellipse, we will use the arc effect of the following options; Twist > arc). Expand the created shape and rotate it slightly to the left.
To create a second arm, select the sleeve and arm (hold down the Shift key) and reflect vertically like eyes and ears. Move the new copy to the right.
Third step
In order to continue wearing, we will add a yellow rectangle and stick it on the bottom of the body. Next, we will modify this rectangle in two steps. First, we will use the Effect & gtWarp & gt bulge.
Then, we will use the "under-arc" effect >；; Twist > under the arc). Don't forget to enlarge this shape.
To finish this dress, we will add a pink belt: create a thin rectangle under the armpit and on the dress. Then use the options shown below to apply the arc effect.
3. How to create a leg step 1
For the first round, we will create four different ellipses and modify them through the deformation effect.
For the top of the leg, create a brown vertical ellipse and apply the deformation effect option: Effect >；; Deformation > under arc (vertical, bending 20%, horizontal deformation 0%, vertical deformation -70%, OK). The black stroke was added for better visibility, but you don't really need it.
For the knee, add a small ellipse.
Next, create a thin, vertically aligned ellipse for the calf and attach it below. Similarly, the following effects are applied: Effect >；; Twist > under arc (vertical, bending 20%, twisting horizontal 0%, twisting vertical-100%, normal).
Finally, for the foot, add a small ellipse at the bottom of the leg. Application effect > distortion > expansion (bending -30%, twisting horizontal 0%, twisting vertical 100%, OK). Remember to expand all created shapes. Just select the whole leg and go to object > extend appearance.
Second step
Next, select all four shapes and use the Unity button (Window >). "Pathfinder") merge them. Now we have a shape.
But this leg looks a bit strange, which is why you want the anchor point in the image to be smooth rather than sharp. Make sure that you have selected the view & gtShowCornerWidget. Then, by using the direct selection tool (a), select each anchor point and move the small circle around it outward. You will notice that the anchor point has become smooth. Be sure to perform this step for the other anchor points marked in the following figure.
For shoes, create an ellipse and put it behind the leg. Use the direct selection tool (a) to move the bottom anchor up. Then, add a small ellipse in front of it. Use the following effects to modify: effect > distortion > expansion (bending -30%, distortion level 0%, vertical distortion 25%, ok). Expand it.
Third step
Put your right leg behind your clothes. Vertical replication. Move the created copy to the left. Our first woman is finished!
4. How to create a second woman Step 1
As I mentioned before, in order to create a new woman, we need to adopt the former one and change her skin, eyes, eyebrows and lip gloss. Because everyone is different, we should make her face and neck wider.
Second step
Start the second lady's hairstyle with two ellipses. Make sure they are behind the head, and then create a new ellipse in front. Using the direct selection tool (A), move the handle of the anchor point to get a result similar to the one below. Remember to hold down the Alt key when you want to change the direction of the handle.
Third step
To give her a charming appearance, let's create pink glasses, which will match her lips. First, select her lips, and then click somewhere on the drawing board to deselect them. But you still have the fill color you want. Then press the Shift-X button, and you will notice that the fill color has changed to the stroke color. This is exactly what you want. Then draw an ellipse on the left eye.
Now, enter: Effect > Twist > Expand (Bend -30%, Twist Level-10%, Twist Vertical 0%, OK).
To create the correct part of the glasses, make a vertical reflection on the left side. Pick up the arc tool and draw a bridge in the middle.
Add two arcs to the temple. Glasses are ready!
Fourth step
For the body, we will use the shape we created for the first woman. Change the color of the shape to white. For better visibility, I added a black brush color, which will not appear in the final image. To change the shape of the neckline, click the direct selection tool (A) and move the handle of the anchor point to get the result shown below.
Next, add the left arm (create a copy of the arm for the first woman) and change its thickness by moving the anchor point (use the direct selection tool (a) to activate anchor point editing). Vertical reflex left arm.
Step five
Now we're going to make pants for the second lady. Make a pink belt for the first woman and then change its color. Add a red rectangle as the left leg.
Now modify this rectangle to use the fish effect: select the circle and go to the effect >; Deformation > fish (vertical, bending 20%, twisting 0%, vertical-15%). To complete the trousers, apply another effect to this shape: Go to Effect >；; Twist > under arc (horizontal, bending 30%, twisting horizontal 0%, vertical 0%). Don't forget the shape produced by expansion. Finally, it is vertical.
Step 6
For the bottom of the leg, copy one from the first woman, change the color of the skin and shoes, and then put it in the original place. The second woman is ready!
5. How to create a third woman 1
Now, we will create a third woman by slightly modifying the image created in the previous step. Copy the head of the second woman and modify it by changing the color and size. Eyes slightly outward (left eye to the left, right eye to the right), giving people the feeling of monocular.
Second step
Make a dark gray rectangle with the rectangle tool (M), and then go to Effect >；; Distortion > protrusion (vertical, bending 20%, horizontal deformation 0%, vertical 15%, OK). Expand the object once, as shown in the figure.
Add an ellipse behind the face. Add another ellipse to your forehead.
Move the handle of the anchor point to deform the ellipse, so as to obtain a result similar to the following figure.
Third step
At this step, you may already know that you need to make a white shirt from the second woman and give it to the third woman. Using the direct selection tool (A), select the bottom anchor point of the neckline, and then view it on the top panel above the artboard. There is a button that says convert: convert the selected anchor point to smooth, and then press. The neckline will change.
To make a skirt, please draw a rectangle on the shirt and under the arm. Distortion: effect >; Distorted > protruding (vertical, bending 20%, twisted horizontal 0%, vertical -8%, normal). Then bend the skirt: effect >；; Twisted > under arc (horizontal, bending 15%, twisted horizontal 0%, vertical 0%, normal).
To finish this skirt, please remove the pink belt from the first lady and change its filling color. Then, put it on this woman's skirt.
Fourth step
Copy the first woman's leg, change the color, shrink the leg and give it to this woman. Change the color of shoes.
Put all the women together and let's see what we have created so far. Group (right-click >) Each woman moves her easily and puts them together. You can also delete the black stroke color on the white shirts of the second and third women.
7. How to create a bunch of flowers Step 1
Use the Polygon tool and click on your workspace. A new dialog window will ask you how many faces you have and the radius you want. Make 6 faces and any radius. When finished, press OK.
To turn this polygon into a flower, go to Effect >；; Distortion and deformation >: folding and expansion. In the new dialog window, move the slider to the left by about 100%. It really depends on how you want your flowers to look, so adjust the settings at any time. Once you like its appearance, press OK.
Create another copy of this flower and give it another fill color. Expand two shapes.
Second step
Start with a green ellipse. Now, transform the anchor tool (Shift-C) and create a leaf shape. Click the top and bottom anchor points. You will get a simple leaf shape.
Third step
So now you have two flowers and a leaf. Use these elements to create a flower combination. Select these elements and create multiple copies of them. Now, just move or rotate them to create a package. Group the bouquets for later movement.
Fourth step
Give each woman a bunch of flowers and cover the weird arms at the bottom. If you like, you can adjust the position of the flowers/leaves slightly. Make sure the bouquet is not too low, but only a little lower than the waist.
8. How to create a background step 1
Let's finish our illustration. Use the rectangle tool (M) to create a light peach square. Click on the Sketchpad and enter 850x850 pixels.
Put the background behind the woman (Control-X, Control-B).
Second step
To add some dimensions to the scene, create a darker ellipse at the bottom of the background. Make sure it stays behind the background and the woman.
So today's "How does artificial intelligence draw vector illustrations of three graphics? AI Drawing 3 Portrait Vector Illustration Tutorial is over! Learning AI software image creation, in fact, in addition to finding high-quality courses to learn, we must watch more, practice more, think more, and draw inferences from one another! Only in this way can we master the drawing skills of AI software better and faster! Tu Tu here hopes that everyone can learn the use of AI software and become a great god of image creation as soon as possible! Finally, here Tu Tu recommends more AI video courses for everyone: