Matters to be prepared include:

1. transfer paper (it is understood that there is almost no difference between expensive and cheap).

2. Printer

3. Iron (must not be sprayed. If it is spraying, it can also be turned off, and the temperature should be around 200 degrees; It is best to print football uniforms with a bronzing machine)

4.a towel and a pair of scissors

5. Cotton T-shirts

Get everything ready and you can start. It should be emphasized here that iron must not be sprayed. If it is a spray iron, you need to turn off the spray function. And transfer paper can be divided into front and back, with stripes on the back, so there will be no mistakes when printing.

Everything you need.

Transfer paper and instructions.

Iron and scissors

Iron and printer

Step 2: Print Settings

Everything above is ready, and the next job is to print transfer paper. First of all, you should prepare the drawings you need to print. Cut the pattern with scissors after printing, so that you can make full use of the blank space when designing the printed draft and "fill" the cute little picture with the blank space. Now let's talk about how to set up printing.

First of all, you need to adjust the resolution of the map to above 150 or 150, and the edge shot uses 300 resolution. In addition, it is best to adjust the size of the chart used.

Then set the printing options, taking Epson 2 100 as an example. If there is "transfer paper" in the media type, choose transfer paper; if not, choose "plain paper" (Epson 2 100 has no transfer paper option, but this will not affect our work). Select "Custom" as the printing mode, then enter the advanced setting mode, and select "Normal -—360dpi" as the printing quality. Be careful not to choose too high print quality here, because if you choose photo print quality, the print resolution will be high, and more ink will be used, which will affect the glue on the transfer paper, resulting in the final printing. There is another place that must be paid attention to in the advanced settings, that is, you must choose "horizontal flip", so that the negative picture can be printed and then printed on the T-shirt to be the front.

Paper selection

Advanced settings

Design mode, make full use of blank space.

Step 3: Preparation before formal printing

When transfer paper finishes printing, we need to cut out the pattern. Because the printing surface of transfer paper is a layer of glue, if the pattern is not cut off, the glue on the part without pattern will also be printed on the T-shirt. Pay attention to leave a blank edge of 4 or 5mm when cutting to ensure that the pattern is not easy to fall off. But don't leave this side too wide, because if you don't control the time when ironing, the edges that should be transparent will be baked yellow.

Put the towel flat on the table, put the T-shirt on the towel, turn on the iron (be careful not to spray), and iron the place where the pattern is to be printed first.

Printing transfer paper.

Cutting mode

Step 4: officially start printing.

After all the preparations are completed, you can start printing. Note that the temperature of the iron should be around 200 degrees, neither too low nor too high. If the temperature is too high, it is easy to burn clothes.

First of all, we must pay attention to safety. During the ironing process, we must constantly move the iron. Never leave the iron in one place for more than a few seconds, otherwise the clothes will be spoiled and there will be no fun:)

When you think the temperature of the iron is enough, put the cut pattern on the ironed T-shirt, with the pattern facing down and set the position.

Print the picture on the T-shirt.

Then the iron starts to iron the pattern from one direction (it is emphasized here that it must not be sprayed, as if it has been emphasized several times _). First, iron the whole pattern quickly to ensure that some complicated parts of the pattern will not be pried back. After that, it is necessary to start heating according to the partial focus. Starting from one direction, the iron is heated in an area for 20 to 40 seconds (this time depends on the temperature of the iron and the quality of the T-shirt), not less than 20 seconds, otherwise the printing is not firm, try not to exceed 40 seconds, and it is not too big, otherwise it is easy to burn the T-shirt or yellow the transfer paper glue. In this process, the iron must keep moving (just a small gesture, as long as it doesn't bake Hu clothes). After the first area is completed, proceed to the next area in one direction. After ironing all the parts for 20 to 40 seconds, if the clothes have no odor, it means that they will be successful soon, but don't worry. In order to prevent the pattern from falling off, we should finally focus on heating the edges. However, it should be noted that the iron must be moved quickly at this time and ironed for two or three times, not endlessly.

Finally turn off the iron. The whole ironing process should be controlled at about 2 minutes, and it must not be too long.

Ironing process

After turning off the iron, let the T-shirt cool for about 10 second, then pick up the T-shirt and gently shake it for about one minute. Then smooth the T-shirt again and start to peel off the paper slowly from one corner. Be careful at first, don't buckle too hard. What needs to be noted here is that it can't be cooled for too long, and it will be difficult or even impossible to uncover it for too long.

Finished product production

When you have printed all the patterns to be printed according to the above steps, a personalized T-shirt of your own will be finished. Be careful not to let the T-shirt get wet for a day or two, and then you won't be afraid to wash it. If you do it well, this pattern will never come off. Let's take a look at this.

Make a positive pattern.

Wear it in front of your body.

Wear it behind your body (sleeves are justice superman hohoho ~ ~ _)

Make a summary

See here, everyone knows how to make transfer paper T-shirts! Let me summarize some key parts.

1. The iron must not be sprayed (it has been said n times), and the temperature should be controlled at about 200 degrees.

2. The whole ironing process is controlled in about 2 minutes. Keep moving the iron to prevent scalding clothes. It is recommended that the local ironing time should not exceed 40 seconds.

3. When printing transfer paper, don't use photo print quality, but use ordinary print quality. Make full use of blank space. Remember to check "Flip horizontally".

4. Don't dry it for too long after ironing, so as not to take it off.

Don't touch the water for a day or two.

Finally, I want to say it again: "DIY mercy, we can afford it!" ! ! Ow ~ ~ "