1 First prepare the cloth, use woolen cloth, first cut the pocket surface cloth, then cut the interlining with similar colors, and cut two elastic bands, the length of which is generally about 5 cm shorter than the width of the pocket.
2. A piece of flannel, a piece of plain cloth, then align the front inward and sew a circle. Remember to leave about 3 cm back at the bottom edge. When sewing, sew two ends of an elastic band at both ends of the bag mouth by the way, and trim the bent seam after finishing.
3. Turn the pocket out from the front, then sew the back seam, and then sew the track line under the elastic band.
4. Draw the pocket position on the front garment and fix the pocket before sewing.
5. Cut two pieces of face cloth and flannel according to 1: 1 ear plate, align one piece of face cloth and one piece of flannel, sew them, and then turn them out from the front to make ears. Then fold the ear hair inward and fix it on the top edge of the hat side, as shown in the figure:
6. Sew the middle of the hat and the side of the hat, so as to make the surface of the hood, then sew it into the plush hat, and then sew the two layers of the hat inward, as shown in the figure:
7. Before putting on the hat, the front piece and the thick piece of the clothes should be sewn together, and the lining is the same as the tablecloth. The tablecloth of the hat and the tablecloth of the clothes should be stuck together and then sewn fixedly. Then stick a plush lining and sew it up, and extend both ends when sewing the starting point and the end point.
8. Tile the front and rear pieces respectively, and align the front and rear layers of armholes inward, and then sew the armholes. After the armhole is sewn, sew the side seam again, and don't mix it up when sewing.
9. The lining cloth, surface cloth and surface cloth of the front and rear side seams are aligned and stitched, and a back seam is left on the lining cloth of one side seam, about 10 cm.
10. Next, we need to deal with the rest of the hem and the placket, with the front facing inward, and then sew a line along the edge from beginning to end.
1 1. Sew the back opening, and then knock 40% off in front of the door.
The above is a brief introduction to the sewing technology of children's hooded vest. The sewing of children's hooded vest is not particularly complicated, but it is very difficult for beginners. In the process of sewing, some small parts on children's hooded vests should be sewn first. The vest made here has pockets. You can sew two pockets first. The drawings of the pockets can be downloaded directly from the Internet, or you can draw them yourself, and then cut them according to the drawings. However, the pattern is relatively pure, and seams should be added when cutting.